I have shot 2 deer with the .357 and 4 with the .44 with a rifle.There was a big difference in damage done by the .44 compared to the .357 I used...
I wouldn’t be surprised if they would loosen but that can be fixed.A single shot if the barrel steel is equal will give the maximum barrel life...
I would almost bet before you shoot out the barrel on a handi rifle you will have other problems. Everyone seems to think that they are simple and...
I believe the 1894 .357 wasn’t introduced till 78 or 79
I have both have had a .260 since they first came out.I wanted a SS synthetic stocked rifle new .260 chambered rifles are pretty rare so I bought...
There is quite a bit of variation in the sizing ring in the Lee FCD.I had a 40/10mm FCD die that a jacketed bullet alone wouldn’t fit in.The one...
Do a search on google or wherever for Improving RCBS’s APS strip loader it will bring up a older thread on here that may help.For some it doesn’t...
Try it.It may work with upper level loads and heavier Bullets.I know with lighter Bullets in other cartridges its so dirty that it will tie the...
Do you check to see if its always the same brand of brass?
If was me I’d anneal the cases.And try to find some less expensive 30 caliber bullets and jam them into the lands to fire form them.
Amazing what one can learn from a real expert :)
Do you handload?Is this a prefit barrel?The 6mm Rem. is a long cartridge for a short action. If it was me I'd have it throated so the bullets...
Are you sure the bulge is whats causing them not to chamber?I checked some factory they measured .421-.422 my handloads after a Lee FCD measure...
Nothing wrong with the Weaver Grand Slams only issue I've had is one top cap threaded hole was a little difficult carefully ran the screw in and...
Could someone send the code to me Thanks
Are they like these Lynx Mounts | Mounting Systems | Lynx Optics at one time a set came with the purchase of a World Class scope.If been awhile...
Till you have to go thru a patch of briars or multifora roses
how are the deliveries on bullet orders? | Page 3 | The High Road You are about two weeks later than me.I haven't heard anything on my order yet.
I have some old Lee shell holder 80s.Never saw any knurled ones.The only knurled ones I have are Redding.
My order is about a week later than yours.Hopefully I see mine soon.
Separate names with a comma.