Apply with the cotton ball as mentioned. Then rinse and dry and card each coat with 0000 super fine steel wool. Wipe with degreaser (the steel...
Perhaps CYounger's new toy was made using an overly long "out of spec" arbor and by some odd chance it just fit? I do agree that this would be...
Gauge pins or slugging and then measuring the grooves in the slugs that gives the bore. Both will provide the results needed. But one costs more...
Hillbilly, a lot of great advice so far. Hopefully you find these below similarly useful. If you shoot your C&B revolver a fair amount you might...
The tensioning screw setup is the TK Custom one. Or someone copied it. Either way that is what is on this particular gun. Long adjustment screw...
A buddy and I have been working on tuning his JM 625. We've got it firing rounds consistently but only with a higher trigger pull than we think...
Thanks, I had totally forgotten about that style. Or or two of the project rifles will get that style. I like the fact that even with click...
Good point. I'm leaning to the style with the slot and single piece ladder. So the parts to either side of the slot will be the parts that flex.
Beag_nut, that's truly resourceful ! I've done a couple of oddball adaptions like that too. But this time around I'm looking for something more...
SC45-70, that's really nice work you did on that one. And good use of stock shape and carving away the rest. I'll keep that in mind for other...
For a few oddball reasons I'm looking to make up a few rear sights for some rifles I have on hand. I'm wondering if any of you have done...
I'm another Miroku 1873 owner. I've had it for a year and a half now and use it for plinking as well as Wild Bunch cowboy action matches. My...
There's nothing at all wrong with projects for personal fun. A couple of buddies really enjoy big boomers loaded to the max. And one of them...
That's what I do even with my smaller smokeless loads.
That's an interesting project. If I were to do something similar I'd plan on doing it with the rear lugs and screw. The upside of a well...
In support of the well intentioned warnings given so far you can see pressure numbers in any reloading data book. Lots of powders that deliver...
Yep, long range with rimfire is a hoot. I've seen it more than once that shooting .22LR out to 200 and 300 yards is much like shooting .308Win...
No one has mentioned it yet so I guess I will. Size... .Not ammo size though. That's been discussed heavily. Rifle size and weight. The handgun...
You MIGHT be able to make up a new extractor that is shaped to act a little springy and to snap up into the ACP groove. But before I bothered...
I don't have Walkers or Dragoons. But I do have three open top .44's. And as Mike says they ALL needed fitting. And yeah, that's solid gold...
Separate names with a comma.
