[ATTACH] This is a close up picture of an unfired pistol primer. Look along the upper rim of the primer cup and you can see the legs of the...
I have hand loaded a lot of Remington 115gr JHP's over the years, the same copper jacketed lead core bullet used in their UMC and standard...
Taurus redesigned their frame mounted safety on their PT92 and 96 series Beretta Clones to give it a hammer drop safety option in the 90's. I...
If you have hard cast commercial bullets you need to push them to magnum pressures in order to obdurate their base when shot to avoid leading as...
Shotgun shells are reloaded with the exact case hull, amount of shot, wads, primer, brands of product and powder charge listed in the data found...
When the surplus Egyptian ammo was available I bought quite a bit of the 9mm to shoot for cheap practice and a bunch of the 8mm Mauser that I shot...
I've been loading .38 spl using158gr cast RN and SWC bullets with 4.0 gr of Alliant Green Dot since I picked up a Keg at an estate sale a couple...
Current market prices are crazy and I don't even go to gun stores any more because I know that if I wait a year or so the prices will turn down as...
Factory standard recoil springs are selected by the manufacture gun designers to provide reliable function in the handgun with the typical ammo...
In its normal cycling of a round a semi auto will have a disconnector that disengages the firing mechanism until the firearm is back in full...
Birdshot and Buckshot spread the same from a cylinder bore typical for a riot/security shotgun. From a cylinder bore shotgun, shot either buck or...
There is really no point to determining the burn rate powder manufacturers make their powders vrs canister grade powders used by hand loaders....
I think the best way to remove cosmoline is with heat. My dad was a supply Sargent for a tanker battalion after WWII. When I complained about...
My favorite powder to load 9mm with defensive level loads using JHP's in 115 gr is Unique. I can get +P velocities in 9mm with 115 gr bullets...
If you have a old gun with broken stock for a pattern a new stock can be made. I found this website in about 20 seconds using a google search....
I have loaded 125gr .357/.38 Gold dots for years along with other Speer 125gr bullets with a 3/4 jacket. Looking at various You Tube expansion...
If you try to shoot a light load of W296 or H110 the powder may not burn causing a squib. The force of the primer firing will push the bullet...
[IMG] This link shows older Alliant data that had Herco loads for bullets 110 and others on page 2....
You are loading your lead bullets with too high a charge. The 115gr lead bullet Lyman data found in my 30-30 One Book list a suggested starting...
I have two 3rd Model Woodman Target Sports. My dad bought one in the 70's and I always liked it. Found one at a gun show and bought it. I've...
Separate names with a comma.
