Yep my bad, I screw that up everyday and twice on Sunday. The LGS gave me a shorter rear sight to lower the POI. Thanks for the correction.
I bought a Sig 938 Legion that shot 6" high at 15 yrds with 124 gr bullets and 4" high with 115 gr bullets. I loaded some 100 gr RNFP and was able...
Taller front sight should work, unless I'm thinking of this back asswards.
I prefer a powder that meters well in my powder throw for .380 acp as you go from .380 acp to 32 acp and 25 acp this becomes more important. For...
Check your primers they should be seated just below the case head.
If you are applying any crimp I do that in a separate step.
Do you notice any...
I have not owned one but this looks like a good option.
I wish they made a back lock...
I use a nylon cleaning brush wrapped with strands of copper chore boy attached to a cleaning rod and chucked into a drill.
I voted no. But if I could find a six shot J frame with a 2 3/8" barrel chambered in 32 H&R mag I would reload for that, my wife needs such a gun.
What .357 or .358" WC bullet are you using? There are many WC variations.
Pretty happy with the Spyderco Native 5.
Seems like the 41 magnum and the 10mm would be a closer comparison than the 357 magnum vs the 10mm?
WSF will do all of those better than Unique IMHO, WSF will meter better and burn cleaner. The issue with WSF is the lack of data.
I have used this powder for upper end 45 acp and it works well. My only complaint it takes a lot of #5 to get where you need to be.
For small cases with a narrow spread between min and max I like powders that meter well in my powder measure, Accurate #2 comes to mind.
I like the idea of the 270 Ren. but I would rather have it in .257" or 6.5mm.
On another thought why not straight wall the 17 WSM to .251 or .257"
Is old data old? Trust but verify.
The Hornady data I have, is tested in a actual firearm instead of a test barrel.
I try to get other data and compare, you can find a 9mm Luger...
Either one of these two, https://www.thehighroad.org/index.php?attachments/guns-002-jpg.134167/
A S&W 696 or a Ruger Security Six chambered for...
If you could deal with a heal clip mag release the PM would be a good choice.
Separate names with a comma.