Guess I got lucky with the lee.
Lee will fix their mistakes.
I bought a new set of 44 dies that had a 45 colt sizer die and they sent me the right...
I use the lee .50 beo dies in a lee classic turret.
For bullets the berry's plated and lee 440gn cast.
Powder RL7 with the cast, H110 4227 Lil Gun...
PPU has had some brass issues I had some 30-30 that would stick in a marlin 336 but was ok in a winchester 94 and did same when reloaded.
[ATTACH] I have a mask and like it.
Sounds like its time for new springs in your revolver.
It's even better when you get a delivered notice that says delivered to dock and I don't have a loading dock at my house.
I have had a similar issue with s&w .460 and had to seat primers below flush to get reliable ignition.
My .32 long brass has some off center holes that look to be made with a dull icepick.
Still reloads ok.
I know the long one patterns well with choke.
Site doesn't show it but comes...
Had multiple people come in talking about getting their weed card and getting upset when we won't sell them a gun.
We have medical marijuana but...
I have a .410/45 pistol that uses a straight rifled screw on choke but you have to take it off for 45colt to clear the muzzle.
I think there is...
Look at the brass no wonder the reciever failed.
That case flowed before the bolt came loose.
Found this, I will be using some 220 gr pc bullets in my 300blk looks like ~9.5gr is a good place to start....
Nope, maybe just in your area.
Finally approved after 338 days no stamp yet, maybe next week.
Without some kind of decocker mechanism you cannot lower a hammer without pulling the trigger.
When you are staring at a 5" screen 12" in front of your face.
Under a month.
Lyman cast bullet handbook 4th edition has load data for 100 gr saeco #326 cast bullet.
Lyman 49th has NO 100 gr cast data.
Looking at your video and picture of brass ,My opinion is that Monarch ammo is way over pressure. You even commented on difference in recoil. The...
Separate names with a comma.