I got this job out again.
I expanded all my necks. I think I am a neck turn ,and anneal from good brass.
I would not try this project again. I am...
I would wear eye protection, and give it a go.
I have used all the common flavors of dies. I have been buying Redding for new projects.
I like the bushings. They work my brass less.
Go for it !
Case feeder = left hand.
Bullet feeder = right hand.
Keep it simple, you'll be fine.
Buy good stuff and don't look back.
Plunk test your ammo.
I don't have a case feeder or a bullet feeder. I don't feel deprived.
I started with a...
I haven't given up, but they are on the back burner.
I ended up with lumpy necks. Likely scrap.
I will back shelf them for now. If I ever get into neck turning, I may try to save them.
I have 101 pieces of once fired Lapua 243 brass. I have sawed off a chunk of the neck and will be running them through a FL 6.5CM die, then...
Happy Birthday, and congrats!
I have never used a turret type press. I am curious how solid the tool head is. Do they flex when doing heavy work ?
I have been well served with a 150 Nosler Ballistic Tip & Varget.
For a straight walled cartridge like 45-70, the Lee dies would be more than adequate.
I am gravitating to Redding on new endeavors.
Has anyone shot these into gel?
I would love to see if they open up or act as a solid. That's a mighty thick jacket.
Again, this is a fascinating...
How well do they fly ?
I read this yesterday, and may have missed or forgot, but are the spent primers left in ?
This is a fascinating thread.
I lack ingenuity, but I am fascinated by others.
Auto correct often writes things far more interesting than what I was trying to say.:-)
I have about the same amount of each size primer in the...
You lost me with "grass". Please clarify.
I may just look in the safe and order brass that fits the primers I have the most of.:-)
Sometimes we pickin up.
Sometimes we dropping off.
This will be a rifle that is too heavy for hunting, unless you hunt pretty close to the truck. It started as a 243 Varmint Target. The new barrel...
I am gearing up to load 6.5 CM. I am rebarreling a Ruger 77.
I see that I have a choice of primer size in my brass.
Are the Rugers one that...
Separate names with a comma.