Quantcast

Search Results

Search Again
Page 1 of 356
  1. 243winxb
    Post

    Bullet contacting powder during seating...concerned

    CAUTION: The following post includes loading data beyond currently published maximums for this cartridge. USE AT YOUR OWN RISK. Neither the...
    Post by: 243winxb, Dec 6, 2019 at 8:06 PM in forum: Handloading and Reloading
  2. 243winxb
    Post

    6.5 Carcano sense check

    CAUTION: The following post includes loading data beyond currently published maximums for this cartridge. USE AT YOUR OWN RISK. Neither the...
    Post by: 243winxb, Dec 5, 2019 at 8:19 PM in forum: Handloading and Reloading
  3. 243winxb
    Post

    Lube inside neck high volume

    Carbide should not need lube?...
    Post by: 243winxb, Nov 27, 2019 in forum: Handloading and Reloading
  4. 243winxb
    Post

    Lee Classic Loader (.44 Magnum)

    Its a good idea to ask questions before buying, as you are. Skip the Classic loader. Buy a press with dies. I started with the Classic loader in...
    Post by: 243winxb, Nov 27, 2019 in forum: Handguns: Revolvers
  5. 243winxb
    Post

    Lee Classic Loader (.44 Magnum)

    So, you dont own a 44 or have a classic loader? :rofl:
    Post by: 243winxb, Nov 24, 2019 in forum: Handguns: Revolvers
  6. 243winxb
    Post

    Adjusting body diameter and shoulder bump separately for .308 cases

    :rofl:
    Post by: 243winxb, Nov 24, 2019 in forum: Handloading and Reloading
  7. 243winxb
    Post

    lead fouling a barrel

    Give bullets a coating of Lee Liquid Alox as added insurance against lead fouling. Less cleaning.
    Post by: 243winxb, Nov 23, 2019 in forum: Handloading and Reloading
  8. 243winxb
    Post

    Hornady 68gr 223 bthp help

    On the target, for sure. [ATTACH] To many bullets. Gets more confusing every day.
    Post by: 243winxb, Nov 23, 2019 in forum: Handloading and Reloading
  9. 243winxb
    Post

    Hornady 68gr 223 bthp help

    Are the bullets seconds? Midwayusa has 68 grs for sale. https://www.midwayusa.com/product/1010677780?pid=536262 Try a different lot number of...
    Post by: 243winxb, Nov 23, 2019 in forum: Handloading and Reloading
  10. 243winxb
    Post

    Rear sight almost falling out

    Put a shim in the bottom of the dovetail. Hammer sight in. I use aluminum foil at the correct thickness. Trial & error fitting.
    Post by: 243winxb, Nov 22, 2019 in forum: Gunsmithing and Repairs
  11. 243winxb
    Post

    Lee Classic Loader (.44 Magnum)

    For the most part , yes. Most powder charges are on the light side or like a starting load. But not always- Its best to check load data online &...
    Post by: 243winxb, Nov 21, 2019 in forum: Handguns: Revolvers
  12. 243winxb
    Post

    Lee Classic Loader (.44 Magnum)

    Just sized some fired 44 mag brass that had 10 grs Unique/250gr lswc as a load. Fired near mouth .456" Sized in Lee classic die .452" Got...
    Post by: 243winxb, Nov 21, 2019 in forum: Handguns: Revolvers
  13. 243winxb
    Post

    44 Magnum vs 357 Magnum

    Hunters dont fire a lot of rounds per year. So ammo cost should not be a factor. If you feel less recoil will allow you to shoot more...
    Post by: 243winxb, Nov 20, 2019 in forum: Rifle Country
  14. 243winxb
    Post

    Adjusting body diameter and shoulder bump separately for .308 cases

    :thumbdown: The expander should correct most of it.[ATTACH] When fl sizing.
    Post by: 243winxb, Nov 20, 2019 in forum: Handloading and Reloading
  15. 243winxb
    Post

    Unfired Round 1911.

    Post #2 great info. I have made adjustments to the magazine lips. May only take a few thousandth bending inward to keep the round from popping out.
    Post by: 243winxb, Nov 20, 2019 in forum: Handguns: Autoloaders
  16. 243winxb
    Post

    Tricks to stop front sight wash out

    I used a Sight Black spray can of carbon black when shooting Bullseye Pistol. Others used a carbide lamp to blacken the front sight. I see this...
    Post by: 243winxb, Nov 20, 2019 in forum: Handguns: Revolvers
  17. 243winxb
    Post

    Case mouths have a lip - once fired .308, what's the cause?

    Sizing some brands of brass from 308 to 243 in a bushing fl die, with no bushing, produced a case mouth flare for me. . The brass has taken a...
    Post by: 243winxb, Nov 20, 2019 in forum: Handloading and Reloading
  18. 243winxb
    Post

    Should I sell my 342PD?

    https://www.thehighroad.org/index.php?threads/360pd-cylinder-erosion.820753/ CAUTION:TITANIUM & SCANDIUM REVOLVERS The titanium cylinder used in...
    Post by: 243winxb, Nov 19, 2019 in forum: Handguns: Revolvers
  19. 243winxb
    Post

    Vietnam era mag?

    When i sold these, i found out some old magazines are "grandfathered in" . They could be used in areas that ban larger capacity magazines. Makes...
    Post by: 243winxb, Nov 19, 2019 in forum: Rifle Country
  20. 243winxb
    Post

    Adjusting body diameter and shoulder bump separately for .308 cases

    https://www.shootingillustrated.com/articles/2018/8/19/308-win-vs-762-nato-whats-the-difference/ Many FAL are made from parts kit.
    Post by: 243winxb, Nov 19, 2019 in forum: Handloading and Reloading
Showing results 1 to 20 of 7,102 Next >
Search Again
Page 1 of 356
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Accept Learn More...
    Dismiss Notice