Quantcast

Search Results

Search Again
Page 1 of 34
  1. kingcheese
    Post

    22-250 choices in my budget - which one to choose?

    mine is a Stevens 200(its made by savage) cost me $400, then another $120 for a Redfield revenge 2-7x32, I love it, simple it works, basically a...
    Post by: kingcheese, May 15, 2014 in forum: Rifle Country
  2. kingcheese
    Post

    stengun build

    I was able to test fire it, I have some feed issues, hopefully a Lil polish will fix. I only got one round shot. but when I inspected my brass the...
    Post by: kingcheese, Jan 17, 2014 in forum: Gunsmithing and Repairs
  3. kingcheese
    Post

    Rem-Oil?

    I've used it, but like frog lube better i
    Post by: kingcheese, Jan 17, 2014 in forum: Gunsmithing and Repairs
  4. kingcheese
    Post

    looking to remove the front sight plus base on my ar 15 help

    and maybe some Allen keys if it has a set screw in the bottom of the base, make sure your muzzle break ain't welded/pinned on
    Post by: kingcheese, Jan 16, 2014 in forum: Gunsmithing and Repairs
  5. kingcheese
    Post

    stengun build

    it is a striker fired system now, and in the event that the sear fails the striker "should" ride with the bolt and prevent slam fire, the firing...
    Post by: kingcheese, Jan 13, 2014 in forum: Gunsmithing and Repairs
  6. kingcheese
    Post

    stengun build

    it is not the sear itself, it is called a sear lever/trip leaver and it works like a disconnect, but when I charge it it holdsthe striker, but the...
    Post by: kingcheese, Jan 13, 2014 in forum: Gunsmithing and Repairs
  7. kingcheese
    Post

    stengun build

    ok, my trip lever is not engaging my bolt, how should I go about fixing it?
    Post by: kingcheese, Jan 12, 2014 in forum: Gunsmithing and Repairs
  8. kingcheese
    Post

    stengun build

    Thanks for the information, I did decide to go ahead and make it a 9mm. My reamer should be here tonight
    Post by: kingcheese, Jan 10, 2014 in forum: Gunsmithing and Repairs
  9. kingcheese
    Post

    Mauser blue or duracoat

    you can also through that stock in a black trash bag and let it sweatout the cosmoline. I had a similar problem with the stock on a nagant. I...
    Post by: kingcheese, Jan 2, 2014 in forum: Gunsmithing and Repairs
  10. kingcheese
    Post

    stengun build

    indeed I do know a couple guys who have a lathe, and they are willing toto help me with the bolt and barrel. is im planning on making my bolt...
    Post by: kingcheese, Dec 31, 2013 in forum: Gunsmithing and Repairs
  11. kingcheese
    Post

    stengun build

    okay, my new bolt has a recessed bolt face, and I'll need to open it up a few thousandth to allow the 40casing to fit, is there a tool made...
    Post by: kingcheese, Dec 25, 2013 in forum: Gunsmithing and Repairs
  12. kingcheese
    Post

    stengun build

    I have heard of 40s and 10mm stems. but I've not actually seen one. the bolt itself, with my conversion is also made to run the 7.62x25 and the...
    Post by: kingcheese, Dec 18, 2013 in forum: Gunsmithing and Repairs
  13. kingcheese
    Post

    round stuck in barrel of glock 27. which direction should i drive it out.

    I'd sayout the muzzle... but that's just what I'd do
    Post by: kingcheese, Dec 16, 2013 in forum: Gunsmithing and Repairs
  14. kingcheese
    Post

    stengun build

    alright then. I'll stick with the 9mm. another question is if it would be safe to solder the trigger housing to the tube vs welding. based on my...
    Post by: kingcheese, Dec 16, 2013 in forum: Gunsmithing and Repairs
  15. kingcheese
    Thread

    stengun build

    So I finally started buying my parts to build a stengun. im using a mark 3 parts Kit, and a Indianapolis ordinance semi auto conversion. I was...
    Thread by: kingcheese, Dec 16, 2013, 18 replies, in forum: Gunsmithing and Repairs
  16. kingcheese
    Post

    Mosin Nagant M38

    timney makes a trigger group for them
    Post by: kingcheese, Nov 25, 2013 in forum: Gunsmithing and Repairs
  17. kingcheese
    Post

    Is bolt assist on AR really needed?

    the way I see it, the m16, M&A, and ar platforms wouldn't have ever gotten the forward assist if there wasn't a real problem present, you may...
    Post by: kingcheese, Aug 20, 2013 in forum: Rifle Country
  18. kingcheese
    Post

    First centerfire rifle

    read the IN hunting regulations first, if your looking for a deer hunting rifle in this state it wouldn't hurt to call DNR and ask them about a...
    Post by: kingcheese, Jun 14, 2013 in forum: Rifle Country
  19. kingcheese
    Post

    savage model 11/111

    the only swap I might look at would be the 300 black out, anyone know where I can get a second centerfeed magazinefor when I swap stocks
    Post by: kingcheese, Jun 2, 2013 in forum: Rifle Country
  20. kingcheese
    Post

    savage model 11/111

    I got my Stevens 200. got in a 22-250, decided that I needed onethe second I seen it. I figure it'll at least be good for coyote
    Post by: kingcheese, Jun 2, 2013 in forum: Rifle Country
Showing results 1 to 20 of 678 Next >
Search Again
Page 1 of 34
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Accept Learn More...
    Dismiss Notice