Lee die set, (will upgrade to Redding) cheap 2 inch cutter from Harbor Freight and eBay jig that fits it, AA 1680 powder, 180 grain soft points...
All and all, it's a great powder. Have a partial 8 pounder and a spare 8 pounder in reserve. Very safe powder to use, but flakes meter more...
Reread....lower power loads are dirtier.... Unique, compared to BE86 is not exactly clean. After 200-300 rounds, 5 grains makes my hands fairly...
One of the things with Unique is, probably one of the safest powders I have used with 9mm. Impossible to double fill, almost impossible to get too...
Yes, I have a Hornady set for use with micrometer, as well as RCBS precision micrometer contraption similar in function to your device, but your...
Odd, link works for me, it goes to MidwayUSA, device is called L.E. Wilson Case gauge depth micrometer. Russellc
I think I posted with you before, it works in conjunction with the case guage. You slip the brass/bullet in the guage, then this contraption goes...
Same here, a tool and gadget junkie. I have a similar device from Wilson, and RCBS precision mic and various comparators from Hornady. Don't...
Is this the Whidden unit you are using: https://www.whiddengunworks.com/product/case-gauge-3/ Or this one ?...
I still haven't fired mine! Russellc
Seems like I remember reading on the Savage Shooter forum about this happening with Savage rifles. The thread I was reading "fixed" the problem by...
What exactly is meant by "Having the bolt bushed," reducing the size of the FP hole? Oh, and who does this service, Savage, or gunsmith? Standing...
That's part of the attraction of owning/building Ar rifles. Once you have a complete lower, you are only an upper away from calibers other than...
mine is 1:9, shoots great. Savage 12FV. Russellc
You are correct, and if building a Grendel, I would rather it be the other type....... Russe
Well, too late in terms of 300 Black Out, already built one of those and I do reload for it. I have stumbled on a barrel now, hop skip and jump...
Some bit ago, I posted about a build of mine (.458 SOCOM) that I noticed the bolt didnt measure as it should, obviously not the proper Bolt. Fast...
Yes, I built a 300 BO and much to my surprise, found it extremely accurate, using a cheap red dot. My hand loads with 180 gr soft points and 1680...
No, I have not tried that bullet, have you had good results with it? Russellc
I must be the only one that cant get accuracy for poop from Hornady 55 grain and H335 powder. I still have plenty of both. Loaded oodles of them...
Separate names with a comma.
