Case Gauge has been ordered and 'sized brass only, no bullet', was tried after the 2nd sizing with result pictured in post #1. :( This 'latest...
9mm Luger uses a tapered case. For 'bulge busting' 9mm Luger, you use a 9mm Makarov die. I have the 9 Mak die, but find it easier just to scrap...
All were trimmed to 1.91 I've got a case gauge on the way,,, We'll first see if my rifle and the case gauge think alike, and then,,,, the sorting...
Dug out my headspace comparator,,,, 0.400 bushing Factory ammo measures 3.542 Sized case measures 3.540 Does not appear to be a headspacing...
In the pic, the case is all scratched up at/near the spot that the case is binding in the chamber. (No scratch's before) Cannot chamber the worst...
yes
I've run some in a bolt gun. Sierra indicates an COAL of 2.260, which would fit most AR mags
Using Hornady Custom Grade dies and Hornady range pick-up brass. Seems like a significant percentage will not size down enough to chamber in my...
Delete - Repetitive
'Forward' ain't gonna happen 'Reverse' is the only direction we're left with. But, if one is unsure of how to accomplish it with reasonable...
An older friend at work used to buy 22 by the shell at the local hardware store
Do we reload more than just Rifle? Of course. Are there more than just 6 Manufacturers of rifle projectiles? I'm sure there are, but for the...
I'd only consider selling/trading 'I can live without it' stuff, but there will always be those who might prefer making a quick buck. I use...
Charged and seated (100) 223 for the Wife. Sanded the barrel channel on my new 6.5 CM so it would free-float no matter where I 'bag' the front and...
Bottle neck rifle cases will require significantly more than a spritz. :) Think I got about 3-5k cases (mainly 223) out of my last 14 oz can +...
I don't mind sharing with certain folks whom I feel have a genuine need, but I'll also say that list of people is rather short! :)
I donated 1/2 a brick each of SPP to an uncle and a friend of the family a few months ago. Uncle reloads, but wife / fear of Covid has him on...
I (post-tumble) lube tapered/bottleneck cases. 45/38/357 I don't, but like all my brass, they are wet tumbled with AAW&W first which adds a hint...
Yes, my Supreme has RC IV on left, RCBS on right. Dang shame the OP's co-worker was hoodwinked! :fire:
After sizing/priming, I fold a bath towel in half lengthwise and place about 100 cases in the 'hammock' I created. Grab the hammock at each end...
Separate names with a comma.
