As was posted above, more information would be helpful. Given its age, it could be a "black powder" shotgun with a damascus barrel and the pitting...
Been using and recommending drywall anchors for at least 20 years now. The rim will absorb around 10 hits from the firing pin. Can be manually fed...
My 12 year old school buddy and I both lucked out at Christmas of the same year to get Remington Nylon 66 rifles under the tree. We went to Hermes...
For the last 30 years I've used the W.E. Brownell cutters and bifurcated handles. Before the original maker passed, I stocked up on all the LPI...
Very easily. When it was last assembled. If the hammer was not pushed fully forward and the hammer strut was not allowed to swing backward freely...
The BEST of luck with your endeavors. When learning how to checker, the first thing I learned was that "patience" is imperative. If it starts to...
These are all full boxes: [ATTACH] But, these didn't make one's breath any "fresher" ;): [ATTACH]
Were not quite that expensive: [ATTACH] From a 1909 Sears & Roebuck catalog.
That's a Lipsey's Distributor special. Only around 500 were produced for them. Pretty good shooter.
I have done 1911 panels in the past, those that I've made, and for the 22/45 pistols as well: [ATTACH] I only checker when the panels surface...
While I do make grip panels, most during the winter as other work slows down, I've never tried Holly. My main useage involves English Walnut and...
Porting needs to be done properly with the ports at the correct diameter and positioned to where they do their best. If ports are positioned all...
For one thing, the Mark III & IV bolt isn't THAT hard to pull back. And yes, it will work just as well as one that costs twice the price, plus...
You tell me: [ATTACH]
The Ruger Mark III & IV pistol versions have smaller diameter, and tapered bolt ears, so some owners are attaching a "gizmo" called a "halo...
Mitutoyo makes great measuring instruments. Your "groove micrometer" will come in handy if you do much tinkering on firearms and especially if you...
I currently have, and use 6 vises on my two work benches. The very first thing I would recommend, is that your bench be made "rock-solid", in...
Something to consider. Every now and again, Volquartsen Custom (VC) will offer unfired Ruger Mark IV upper take-offs. They're after the grip...
What if the gun actually belonged to "Elijah Kline"? Would you still try to ruin it? ;)
With **NEW** Ruger Mark pistols, most often it will take from a couple of hundred to several hundred CCI Mini-Mags to exercise the springs until...
Separate names with a comma.
