I agree with RULE
set powder measure based on individual drops - verified with a good scale
once you can get 10 individual throws consistently...
Don't have any facts for you.....but here are some thoughts.
When cases are re-sized, I don't believe any work happens to the case head or...
Hogdgons and others have 357 rifle data...that's different than 357 pistol data
Rifle data seems to be the same charge weights as pistols for H110...
based on your example.....the key issue is that its a tube fed lever action
recoil will cause the ammo in the tube to smack into each other - case...
as i said earlier
its an open book question
I had to read a bunch of posts this week by unclenick and this guy Humpy:D
there's alot of wisdom...
Here's my secondary guess..
I have read Blue dot can have pressure spikes....also read it could be from cold temperatures....I don't know what...
I suspected this was a pop quiz
Alliant has issued warnings about high pressure with Blue dot and 357 and 41 magnums
So, I wondered if this...
Yes, get Lyman's 48th or buy the most recent edition
Also buy the bullet manufacturers manual for the bullets you use most
There's much more...
I'll vote 2400 for the 357 for any 158 grain bullet
But prefer 2400 with coated 158 grain SWC'S, standard primer
Unique with 158 swaged...
I'm thinking railroad tracks and a freight engine.
Any in your area?
It's been awhile, but that was always fun!
Take a look at this method for load development
I used the same bullet as mentioned
I’m looking to make up some 30-30 Gallery loads to shoot out of my Marlin 30-30 w/ Microgroove 20” barrel at 25 yards
I have shot the following...
I shoot Power Pistol in 9mm
its very flashy
from what I read - its one of the most flashy powders
if you wanted flash - one of the things would be...
357 = 2400
What is wrong with you people?:D
RCBS Uniflow powder measurer
The Uniflow measure is good - but as you start reloading - take a look at the Lee powder measures that fit on your...
Instead of buying a trimmer at this point, I'd suggest you get a decent caliper and set it to 1.290 inches and lock it
Run 50 expanded cases...
I heard about sig ammo awhile back.....but nothing recently.....anyone familiar with it?
No case stretching ?? No trimming?
Walkalong....sorry to drift here some...but what does a very heavy crimp look like?
I'm used to putting a roll crimp on until the rolled case is...
I agree with the single stage approach to start
I started with a Hornady classic LnL single stage with auto primer
The die bushing system is...
Separate names with a comma.