Sounds illegal from the get go, unless they have the proper license. (and I doubt they would if they're selling at a gun show.) And if they're...
I wouldn't even if I needed them in the worst way. Primed brass in a consignment shop? Just makes my skin crawl with all sorts of worries... :eek:
If you're just starting, I cannot strongly enough, GET A DECENT MANUAL. Sorry for shouting. My favorite all around manual is Lyman's 50th...
"necessary? no, but why bother if you're not really trying? Here's what I have used with GREAT success in my full size tumbler. It will work...
For 38 Special, I use wheel weights or approx~ 9BHN, so ya, by my standards 9 works great The standard is .358", but .359 should work too. If you...
That Much??? You reported that the new batch is only 1 or 2 tenths of a grain more than the old batch. That's minuscule. To be ultra-safe, you...
Yes, one press can do it all. (not every press, but some will) And again almost all dies will fit almost all presses. BUT... Sounds like you...
There's a home/hardware chain in the northern parts called Menards.
Lee aluminum molds are cheap. I guess that's as good of a reason as I can give. :confused: :cool:
Whether you like it or not, the biggest problem is an incoming Democrat in the white house. We saw this when Obama was elected. I stocked up a...
My chronograph helps me make sure I'm in the right ball park. Too fast & I'm worried about too much pressure. Too slow & I'm concerned about...
Agreed! Should be very interesting. Thanks for taking the time to post. I'll certainly be watching this thread. Can we get a pic of just the...
3.2 to 3.7 gr of tightgroup under an HSM 125 gr hp From Bunny Farts to a serious load
I keep a notebook to count how many boxes I've reloaded. And I use 4x2 cards with data inside the MTM ammo boxes
If we can't help, the die makers all have excellent customer service
Ya, don't sweat it. I use what ever I have, Win, CCI, Rem - Just start low & work up. I use a LOT of TightGroup in 9mm, 380, 32 S&W Long, 38...
This was m,y 1st thought. I would remove the crimp by using Lee's crimp remover or if your hands don't work that way, there are a number of other...
Those of us who've been here since before obamanation knew this was coming. It'll be 1-2 years before powder & primers are back in stock & at...
Looks like I bought mine at the right time! I didn't know they quit making 'em
Just curious, do you own a Henry? & what caliber? I'll start. I own 2 Big Boy Steels. 45 Colt & 327 Federal Magnum. Thinkin' about 2 more, 357...
Separate names with a comma.
