Powder, Inc only ships black powder to the lower 48.
RMC makes an inexpensive loading press which helps to take advantage of the easy cylinder removal of the Remington. --->>>...
I wasn't sure if your chambers actually measured .438 as stated or .448 if it was a typo. But one thing to consider is that the ball can obturate...
Did you cast balls using wheel weight lead? I can understand if casting with a harder lead alloy that the balls will be slightly oversized and...
Oh my goodness, tell me this is not possible. Are you sure that the chambers are that small? They should be somewhere between .445, .446, .449 so...
Here's some more photos posted by 45 Dragoon along with descriptions in posts #2 through #9 in this thread. --->>>...
The info. that you seek should be in this post. --->>> https://www.thehighroad.org/index.php?threads/cva-woodsman-50-cal.842523/#post-10945582...
To be honest, I wouldn't expect a 405 grain .45 bullet to be super accurate in a ML to begin with. It's sort of a long heavy bullet and sabots...
I think it depends on how much new coverage and color match that you want to have. Not all browning is the same to begin with. Here's a few...
If your .45-70 bullets are .458 diameter, then you need to use the MMP orange sabots for use with .457 - .458 bullets. --->>>...
It's not recommended to use pellets in any sidelock that's not designed for them. One sidelock that was designed for pellets had a removable...
Very nice! That one also has a fluted cylinder. Jedediah Starr must really stock up when they order guns so they won't sell out for a while.
[IMG] An SASS member permanently damaged his thumb in 1986 when a regular percussion cap detonated by thumb pressure during capping and the gun...
You or Taylor's or the TheOutawKid could try to fit a new hand on one of the 1860's to work with the conversion cylinder, and then see how well...
Vista Outdoor Products bought most of Remington Ammunition for $81.4 million and is ramping up production. In Nov. 2020, Vista said that they...
Maybe the cones can be rubbed with some emery cloth or super fine sandpaper to reduce the taper a little bit. Pietta factory nipples are fairly...
Hornady introduced a new Bore Driver FTX that's has a plastic skirt just like the Aero Tip. Except the bullet has a true jacket and not just...
The more user reviews that you read the better, and Midway has a lot of user reviews. Note that some reviews don't mention which bullet weight was...
To fire it as a smooth rifle, there are options. The tightest shooting load would be a .550 ball and a .015 patch rammed on top of about 90 grains...
Are you sure that the obstruction can't be removed, have you ever tried to remove it? You can't knock it out? I think that's where the ram should...
Separate names with a comma.
