I apparently don't have allergic reactions to it, I have string trimmed it with shorts on by accident and have pull it out of the ground with my...
What did you get? JHPs or soft flat points or what?
Did you water drop the 158gr bullets you casted. You will need to if you are going to load them over H110. 12 Brinell, which is what WW lead is...
Is that air fryer 220 volt? I ask because of the two wires on the floor behind it.
These are the times you must cherish, my granddaughter started out loading with me, and she may still come back to it. Now my grandson is...
If I have a lot to do, I use my drill press on a slow speed.
I use it in 9mm 124 grain RMR mpr's and matchwinners. I also use it with Xtreme and Everglades plated round and flat nose. 4.1 gr for 124gr....
I don't clean mine at all. I use an artist paint brush to knock the flakes loose and leave it at that. The last thing I want to do is have to...
If your cylinder will take 38 spl, why are you wanting to trim you brass back to 38 long colt? Have you tried a 38 spl factory round in your cyl...
This is all I use, down and dirty, Get err Done! [ATTACH] [ATTACH] 2" X 1/8" I think I bought this at Lowes.
Due to ice storms here in my area of North Carolina and putting in more new production machines at work, I haven't got to do much except deprime...
My needs are modest, but I would like to have a dedicated deprimer. I was getting ready to buy the Lee APP deluxe for $79.95 and they all...
http://castboolits.gunloads.com/showthread.php?221939-38-44-loads read this. https://loaddata.com/Cartridge/38-44-High-Velocity-Loads/3364 You...
I started reloading for myself in 1972. 30-30, 32 spl, 243 win on a lyman Jr turret press and a Redding jr.
Guy48065, that model 30 of yours is just about 8 years newer than my 1947 5 screw Hand Ejector. That's it below my 28-2. [ATTACH] I think the 32...
I sort all of them to, so I mostly know what expect from them as an entire lot. Like kmw1954, if I feel something different on my progressive...
Is your brass range pickups, May also have to run them through a bulge buster if they are range pickups. Color one black with a Sharpie, put in...
I agree with the other two replies, I've had best luck with hard cast 9mm with midrange or lower loads of Auto Comp. I don't like fast powders...
I don't know if they can be domesticated or not but we used to have one come into our gazebo at work and beg for food at break time. Didn't seem...
I have the same press, a RC ll, and I also have not had a problem with primers flying everywhere unless I am using my universal decapper with the...
Separate names with a comma.
