Deprimed and removed the primer crimp on about 120 LC .223 cases. Also deburred the flash holes on a box of 20 7mm rem mag brass. I should have...
I've been a machinist/toolmaker for 15 years, and I agree 100%! I have a 0-6" Starrett dial caliper and 1-6" Mutitoyo digital that I use for...
I deburred the flash holes, wet tumbled, and dehydrated my last 100 pcs of 7mm Rem Mag brass. While the brass was in the dehydrator I assembled...
Wet tumbled and sent ~100pcs of 7mm rem mag brass through the dehydrator tonight. Also trying to deal with the sadness of having a day with great...
I have a vortex venom 3moa (pretty much vortex's version of a FFIII)on my wife's PC Carbine and it's great! It's low enough to not need a cheek...
Bulk Hornady 9mm 115gr RN bullets https://www.armorally.com/shop/hornady-115-grain-rn-9mm/
Deburred the flash holes on another ~100 pcs 7mm Rem Mag brass while the ones I did last night were wet tumbling. Saw a thread in the reloading...
Ain't that the truth! I'll be jumping on the first 8 lber I see!
From my understanding, it's right in line with Varget for temp insensitivity. It has been awesome for me in .223 with 75/77gr bullets, so well...
Started deburring flash holes on my 7mm rem mag brass tonight, got about 30pcs in and the "cutter" on the end of the tool spun out of the rod!...
I've been looking for a stripped gen 2 lower for the past week or two, looks like they've been in and out of stock, when someone gets one in, you...
My AR with a 20" 1/7" barrel LOVES 75&77gr bthp bullets. Under 1moa we the reloads, right at 1moa with factory 75's &77's. Less than 3moa should...
Got to sneak back into the reloading bench tonight. Loaded the ladder of 168SMK's and IMR 4166 I wanted to do this morning, also sized 50 pcs .223...
Most of the time it's .308, but lately it's been .243. I just really enjoy shooting both rifles.
I went to load up a ladder of 168SMK's/IMR4166 this morning in .308 with the primed brass that I found.... Then when I measured case length I...
I use that exact 62gr FMJ for my plinking ammo. My 1/7" FN barrels hate anything 55gr, but shoot these 62's well. Especially for being plinking...
Deprimed and removed the primer crimp off of my last 200pcs of LC brass! I ran the 200 I did last night through the wet tumbler. Started messing...
Midway has some 120 & 140gr 6.5 mm bullets in stock, limit 2 boxes....
TAC does very well with 55-77 gr in .223, so that would be my recommendation! I'm definitely a fan of TAC. If he's more interested in the 40-62...
Wet tumbled 200 pcs LC .223 brass, deprimed and removed primer crimp another 200. Only about 200 more left to deprime, woohoo!
Separate names with a comma.
