Well, considering I can load Montana Gold 115 and 124 hollow points to 1.25 OAL for my Sig, Walther and Glock and they plunk just fine, but my CZ...
I have a CZ Shadow 2 and I have to load Montana Gold HPs to 1.09 and RMR 115 and 124gr FMJ to 1.125. Every bullet is going to be different and...
That's just it, they specifically say "first time gun owners" and not 8M+ additional guns. Could just be the way they want to spin things but I...
Can you point me to a proper source for this data? My understanding was that there were over 8 million first time gun buyers in 2020, not 8M more...
If I only loaded 50 of anything in a year, I wouldn't bother reloading. As such it seems you're not in the demographic for a single stage let...
Who doesn't like a bullet with claws. [ATTACH]
I keep about 20K pieces of 9MM brass. I go through about 18K in a year and don't really process any brass at all during the winter (I wet tumble...
If you get a Dillon, I'd recommend getting at least the 750 for auto indexing. It's impossible to get a double charge unless you physically take...
I would recommend debulging any mystery cases you have. If your gun has a properly supported chamber, you won't need to do it all the time. I...
The biggest issue is reloading that way takes a LOT of time. If someone where to develop a press that you can load in spent primers and it will...
It seems someone will have to start selling a primer reloading press and compound for it.
MY LGS has some Remington 125gr FMJ for $25/50. I guess it's not too bad, but the good thing about 357 sig is it cost maybe 1c more than 9mm to...
or that require strong antibiotics.
That is the big contributing problem that keeps making this worse. Vista is still selling to their distributors at reasonable prices, most LGS...
LOL, I think I would pay the $350 for a weekend away from the wife.
I use almost the same mix. I do use citric acid instead of lemi-shine (lemi-shine is just citric acid with fragrance added - some folks did a...
Near me, 9mm is going for $36 per box of 50 with a 2 box limit. That is at any of the stores locally that have any. So that puts it at over .70...
Another thing to try is to run zep purple degreaser with just the pins. I do that every once in a while to clean out any lube that may have...
Unless you have one of the big stores locally, your not going to find stuff at your LGS. My LGS has not gotten any shipments of powder or primers...
Yeah, not stepped, they looked ok after cleaning them but haven't resized or reloaded any yet. I guess I'll try a few rather than scrapping them.
Separate names with a comma.