LOL...that's 25 yds. When I take it to 50 or 100, my groups get worse...but there's always that flyer. With my crummy eyes and a simple red dot,...
No...and that's something I plan on doing here soon. Someone suggested that the barrel heating up may be causing this. I am using H110 in all of...
I've had my Henry about 11 months now, I've loaded up 240g Roze, XTPs, and 250g Sierra Tourny Master projectiles in it with various powders...
My current go-to for Berry's 115g 9mm is seated to 1.100" over 4.1g of Tight Group. I tried seating them higher (all the way up to 1.030"), but...
Some good advice here, fellas. I really appreciate it. I'm going to hold on to it. I think that save the grips, all I have in it is $350, so I'm...
So...here's the story on it. I happened in a local Big R and they had this fella as a used firearm, this is a chain store, so they didn't take...
I live by my own moral code. I do not change that code very often. If there's 2 things on the shelf and I only need 1, I get 1. If I need 2, I...
I'm no pro...but I do have and currently use some Lee dies. I have a set for 44 magnum and 223 Rem. There's things I like/dislike about Lee but...
Lots of great replies here. Personally, I have larger hands so I landed up with a S&W N-Frame 627 "pro"...which isn't very "pro"...but did give me...
Honestly, that's exactly what I was thinking. Personally, I'm not one for having spare firearms around. If I don't shoot it, it gets sold. I...
I picked up this fella a few years back. To the best of my knowledge, it is an old police revolver, it has a stock # on the back strap (see pic)....
Yes...I have different powder dispensers for most of my 550 sets. Having to mess with the powder dispenser every time would be a pain. With that...
*UPDATE* Yeah...so I knocked that carbide resizing ring out of that lee die, used a crummy socket I had laying around and tapped it out. It came...
Possibly, I'm not sure. I bought the Lee carbide deluxe pistol 4-die set: https://leeprecision.com/reloading-dies/hand-gun-dies/4-die-set-pistol/...
I think I'm going to bang that carbide ring out of my Lee FCD this weekend, why not, I'm bored. Looked up some videos on it and it seems pretty...
I have the Lee 4-die set and a Dillon set. Funny enough, I much prefer the Dillon resizing and crimp die, Lee flare/powder and seating die....
Exactly, for what I consider to be "standard" 44 magnum 240g loads, I really like Unique and it's the main powder I use for mass loads. 2400 and...
I forgot to add, with 44 magnum and 240g projectiles, I've taken Unique from 8 to 11g+, never any issues. (these are with 240g projectiles): 8.5g...
Yeah...for reloading materials, I pretty much shop locally. Back in 2019, online sites would have free hazmat and only then was it worthwhile...
I like my 44 mag XTP's hot, so I stick with 2400, H110/296 and IMR4227. With H110 or 2400 and 240g XTPs, I'll take them up to the 1400 fps range...
Separate names with a comma.
