Your welcome! I thought it might help the PD shooters with their swifts and short mags.
I built it on a TC encore platform, so it is pretty easy to take in and out, but it should feed into a bolt gun fairly easy also. It runs on 2- D...
I thought some of you might get a kick out of this! It really helps keep the barrel cooler on my 225 viper. I usually chamber it for 2-3 minutes...
Hello all! I have a cartridge that is similar to the 22-6mm rem. It is .176 longer case than the 22-6. Needless to say, it likes powders in the...
Finally got my 22 project finished. Always wanted to build a high power 22 for hunting. Had a 220 swift at one time. Shot several deer with it,...
Yes, it will be a scorcher. Unless i like what i see, then i will nitride the barrel, and my son will wonder where i got the brass to make it...
Im fixin to build a 22 that will beat most with 70-80 gr bullets! Will reply later....
By the way, my 6.5 hi-power.
Guys, i never in my wildest dreams knew what you guys have gone through with load dev. I know now!! The best powder ive found so far is h4350....
Read an article recently about neck tension. In that article, they talked about neck wall thickness. They say that a case with .014-.015 neck...
I took a bullet and pushed it into one of my fired cases, it didnt just fall down in the case, but i pushed it through with little effort.
When i first bored this chamber out, i used P.O.'s method for chamber depth measurement, and set headspace at +.004 so it would chamber tight when...
P.s. The edges of my primers are still rounded, but a crater. May have a weak firing pin return spring.
Thanks, all, for the replies. I miked the 6.5 creedmoor reamer that i used to deepen this chamber at .296 at the neck diameter, so i believe i...
Recently, i improved the 6.5x65 RWS cartridge. Basically, blowed shoulders out to 6.5 creedmoor dimensions. For those of you that know, rws...
Most of the encore builders wont even touch an encore chamber over .5 base diameter. Thats why i went with the "06" style case. Plus i wanted a...
The nos will surpass it on velocity with 20 more grains of powder.
Its similar to rich shermans 6.5, but i tried to keep the case pressure down by reducing the shoulder angle. I wanted to neck down a 270 roy, but...
Yeah, not worried about it. Ive shot it about 150 times figuring things out, but i figure if your you build something that will do it, your gonna...
Hello gents, i spent the last year working on a cartridge design to duplicate 257 roy performance in a 6.5 mm. Bored out an mgm encore barrel to...
Separate names with a comma.
