after 30 years of doing my reloading on a student desk with a Lee single stage press. I have decided to move to a Hornady LnL AP. figured a new bench was in order. First Picture is of my old bench with the Lee Taken about 15 years ago after a good cleaning.
Purchased the Kobalt 6'...
I have a Rem 788 in .222rem that my dad bought new around 72 or 73 and it is a tack driver. It has little screws plugging the site holes that are flush. I wouldn't Change a thing
I was thinking about that also epwrangler. I finally got my hands on a ASC magazine and used some snap caps and it was better but still scratched the next round in line in the magazine. I'm thinking that I will polish the chamber and the bottom of the BCG and give it a try.
I am going to...
I used 3 different Brands of Ammo, Hornady 168gr A-Max Superformance, Hornady American Whitetail 150gr and Federal Fusion 150gr. First round off the Magazine was flawless it is the next round that always drags and hangs up. It almost seems like the magazine is pushing the rounds up to close to...
After building several AR15's with no problems, I decided to build an AR10. Purchased stripped upper and stripped lower and bolt carrier group from PSA. Barrel and parts kit from Surplus Ammo. Went to test fire and first two rounds where fine. Pulled the trigger on the 3rd round and it stove...
So I've done this a few times and always have the same thing happen. Using Testors model paint when I wipe the excess off after it dries I get smear marks. I've look at every instruction and YouTube vid on the subject but still have a problem. Using acetone to wiper of excess and smears...
My son recently bought the Pro 1000 for 9mm. He fiddled with it some before he got it right but I was so impressed with the way it worked, I will be ordering one for myself. I also have a friend that at the Dillon 550 and he is always having trouble with it (and it cost a lot more than the lee).
Sorry Gun Master. Haven't been back until tonight. I have 3 P3AT's and they are all flawless with all ammo. Never had a rim lock or any other malfunction
My latest build in .223 Wylde. PSA upper and lower, CMC trigger, Wilson 18" SS barrel with target crown, Troy handguard cerakoted Foliage Green and magpul stock and grip also FG. Going to top it with a 4x12 Nikon Scope (on order).
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.