Thanks for the responses, I actually found out that for making a suppressor or sbr from an 80% lower where there is no original manufacture to put "FMI" which correlates to 'Form 1 Registration'
I'll be submitting my Form 1 soon, hoping the wait times are still fairly low.
I did a little searching but the write ups I found for filling out an eform 1 are talking about filling one out for an SBR. I'm working on filling one out to make a .22 suppressor and have a few questions.
1. When adding a line item I am listing my trust as the manufacture because I am the...
thanks for the info.
if you don't mind me asking what is the baffle design look like for the monocore? I've been thinking about doing a form 1 to make a .223 can and wondering about monocore designs for centerfire cans.
Just googling dip comes up with lots of different things. The most probable of what I found is Chem-Dip Carburetor and parts cleaner
http://www.berrymanproducts.com/products/eco-friendly-products/berryman-chem-dip-carburetor-and-parts-cleaner/
Is that what you use?
I have a .30 cal suppressor with SS K baffles that can be disassembled. I am mostly using is on a .300 BLK AR, .223 AR and also put it on my .22 once just for fun. I haven't been able to get it particularly clean and looking for recommendations on cleaning methods, tools and solvents. I...
For a 1-4X scope I've been very happy with my Millett DMS scope. I really like the reticle with a 10MOA circle and a 1MOA dot in the center.
I know there are better and more expensive scopes out there, but it's a great scope to only be a little over $200...
Another vote for the 300 blk from me. I finished off getting a 10.5" 300 blk SBR and a suppressor a few months ago and it's exceeded my expectations. It's more accurate than I expected and you can do more with it using supersonic loads than I expected. Mine started out with just a red-dot...
Hello everyone, I recently got a form 4 back on a .30 call can and now I have the bug so I'm wanting to submit a form 1 to make myself a .22 cal suppressor. I already have a trust set up that I used for my suppressor and SBR, and I see that the eForm is up for Form 1s so I figure I might as...
Thanks for the heads up Arizona Mike, but I already took it to the range and fired it last weekend. Maybe it's a good thing that my suppressor has plenty of clearance, it would have sucked to have a baffle strike my first trip to the range with my SBR and Suppressor. That's surprising to see...
Because when I went into my local gun store they had a gun smith that made them and I figured I'd like to support a local busies. If everyone just buys everything online there won't be any local gun shops. Also when I did a little googling I only found good things about this make. It looks...
I finally received my SBR and Suppressor tax stamps about a month ago. It was about an 8 month wait. I finished putting together my Suppressed .300 BLK build. And took it to the range for the first time last weekend. The build was with the following parts:
-R-Guns lower
-PSA Moe lower parts...
Ok, so based on that this suppressor has extra clearance. I also just measured my muzzle brake and it has an ID of 0.333. I wonder what the bore is on the popular .30 cal suppressors? Can anyone with a .30 cal suppressor chime in one what the bore of their suppressor is?
I just purchased my first suppressor, which is a .30 cal can with the primary use being for my .300blk AR. I purchased a Keechi Creek Arms suppressor, which is the brand of a local builder. When I got it home I disassembled it an measured the baffles to have a 0.396" hole in the center, this...
post dealer samples are also how a lot of ranges that are also FFL holders have full auto rentals. I used to go to a range in Atlanta that had about 15 post dealer sample full autos that they rented to people to shoot at the range. I went to the range with a friend one time and shot a full auto...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.