Search results for query: *

Gun shop was able to get the muzzle nut off. Said it was on really tight. Factory in China must have cranked it down.

My local Walmart in Tucson, AZ had one in the case for $767. It scanned for $599. Might jump on it if it goes down again.

I got it too hot to touch and burned off the Kroil. But not glowing. Will take back to the gun shop i bought and see if they have any luck. Looks like there are threads. My saiga 12 you could take the muzzle nut off with your hands. I couldn't find anyone on the net having a problem getting...

Hello, Just picked a cheetah 12 and wanted to add a muzzle device to the gun. They are supposed to be threaded the same as the saiga 12. But i can not get the muzzle nut off. Tried some Kroil, then heated the nut with a mapp torch, but no luck. I am pretty sure they are normal right hand...

My mannual is dated 2016 and new one 2018.

They must have included a old manual in my box. There was no mention of the magazine installation block in my manual. The pages in the link rizbunk77 provided are missing from mine. Also the slave pin. May call Ruger to get a new manual.

Maybe it was a extra present from the LGS

It came with a cable lock. Block would not fit in the trigger guard.

Hello, Just up a ruger american predator in 6.5 creedmoor and i found a black plastic block with a sliding tab in the box. Have no idea whats it for. I glanced through the manual, but did not find reference to it. Any ideas whats it is? Thanks Brion

Didn't take me that long to repeen it. Good drill bit in a hand drill and some cold blue. Looks real good to me.

I had a non welded stock on PPS43 SBR Project. I cut the pin holding the stock closed and that freed the stock. I used the stock push button and spring from the parts kit ( the original hole is only the size of the original pin shaft). You will need to widen the hole in the receiver to...

I was at LGS to spend some Christmas money and was looking for something interesting. They showed me a Husky M38 ( have one and think the stock was refinished), Chinese SKS for $300( have one), older mini-14, Keltec OD green sub-2000 gen 2 (was interested till i saw the Ruger new carbine and...

Mossberg 715t Missing mag release button right above bottom of mag well.

My stamp came today for my AAC ti-rant i ordered from Silencer shop. Ordered 5/1/16 Form 3 Status: Disposed 8/2/2016 Form 4 Status: Submitted 6/8/2016 Looks like around 9 months to get stamp back to dealer. Brion

Well finally got it out. Gave up on drilling the welded collar out, its hard as Titanium. Drilled a little in the hex hole and tried to vice grip it off, but no luck just check slipping off the nut head. Ended up going a little bigger drill but and drilled the head off. What a pain.

Does anyone have any suggestion on getting the Welded trigger pack screw removed. I just tried to drill out the welded collar with no luck. I went out and got a new 3/16 cobalt drill bit and ran done two batteries and only got two dimples in the collar. Man that is one tough weld. I also put...

I did call and talk to the examiner. He said no big deal as long as it has the stamp ans signature your good to go. Brion

I had four eforms 1's came back approved. Two were submitted 5/22/16 and two 5/29/16. I have two more waiting submitted 6/12/16. It was pretty happy when i saw the four emails. However one weird thing, one approved form is missing the control number. Not sure if this is a big deal and i...

I just picked up a CZ Scorpion today, thats going to be a SBR and also a host for a 45 Tirant that I am waiting on. I only had for a few hours before i dropped it off to be engraved. I read the new Scorpions are coming with 1/2 by 28 threads. I think mine is a new one, as it has the welded...

Meeting with Pat at Leo armory next week. Brion