Search results for query: *

  1. flgolfer29

    Lee Pro 6000 unboxing and testing for OAL consistency

    Sir, I followed your example for setting up the resizing die on the 6000, and got much better results. However, can I get clarification on the following statement? "I initially adjust the resizing die while resizing a case until I do not see daylight between bottom of die and top of shellplate...
  2. flgolfer29

    Lee Pro 6000 unboxing and testing for OAL consistency

    As several members on the forum may know by now, I have been getting too much of an OAL spread on the new Six Pack Pro. I am new to the progressive loading, except for a short stint with a Lee Load Master several years back, and gave up on it after loading approximately 100 rounds or so. I...
  3. flgolfer29

    Lee Six Pack Pro primer seating issue (Resolved, user caused)

    LiveLife & 9mmepiphany were correct !! It should have been obvious to me, but wasn't. I was looking too hard in primer channel to notice the mounting bolt was hitting the primer slider. I removed the press and shortened the bolt that connects it to the mounting plate, then reassembled. The...
  4. flgolfer29

    Lee Six Pack Pro primer seating issue (Resolved, user caused)

    That's a doable option, I have a coworker that could do that for me if needed.
  5. flgolfer29

    Lee Six Pack Pro primer seating issue (Resolved, user caused)

    Poor extension of primer pin Stacked coins Proper pin extension with stacked coins ]
  6. flgolfer29

    Lee Six Pack Pro primer seating issue (Resolved, user caused)

    Uh oh. When I spoke with Lee's customer service yesterday, I misspoke about having the older primer pin. Having time on my hands today, I removed the pin and discovered that I already have the newer style. I'm a little concerned that the replacement parts are not going to fix the priming...
  7. flgolfer29

    Lee Six Pack Pro primer seating issue (Resolved, user caused)

    I spoke with Lee's customer service this a.m. It looks like the press I purchased has the older style primer pin, Lee is sending me the newer version pin & spring, mailing out today. Hopefully, I'll get the parts soon and I can put the new press into service. Flgolfer29
  8. flgolfer29

    Lee Six Pack Pro primer seating issue (Resolved, user caused)

    Initially, I couldn't seat a primer at all. I verified the shell plate tightness, it was tight but verified with a little more torque. I pushed on the priming pin from the bottom and it wasn't getting stuck against the shell plate like I initially thought it was, it could be pushed all the way...
  9. flgolfer29

    Lee Six Pack Pro primer seating issue (Resolved, user caused)

    I apologize if this has been covered previously. This week I received the Lee Six Pack Pro progressive. After setting all the dies I was going to reload a few rounds to get a feel for it. Immediately, I noticed the primer 'stem' was not extending high enough through the shell plate to reach the...
  10. flgolfer29

    Is the New Colt Cobra the same as the old cobra?

    Jesse, can you share the pachmayr product number for the new king cobra grips you purchased? Thanks
  11. flgolfer29

    My Armalite AR-10 experience

    Thanks Sent from my SAMSUNG-SM-G930A using Tapatalk
  12. flgolfer29

    My Armalite AR-10 experience

    I bought an Armalite ar15, and the castle nut was not staked on it either. I didn't notice until after a couple range visits (I'm new to platform). Should I check torque on nut, then stake it ? Sent from my SAMSUNG-SM-G930A using Tapatalk
  13. flgolfer29

    W.S.T., shall I donate an organ?

    Seems very high, I've got an unopened 8 pounder I'll probably trade for something else one day.
  14. flgolfer29

    Smith model 65

    Nice S&W, what's the backup ? Joe
  15. flgolfer29

    Brand new Colt Gold Cup in the house!

    It's okay to post that info. Edit to add: nice weapon Joe
  16. flgolfer29

    SR1911 Lightweight Commander Review

    Thanks for the review, nicely done Joe
  17. flgolfer29

    Where are reloading components available (Not a Discussion Thread)

    I'm good for several pounds, thanks! Joe
  18. flgolfer29

    Turret press vs. single stage

    While I can't comment on the Single-stage/Turret comparison, I will offer my experience going from Turret to Progressive and back to Turret. I routinely load in 100 round lots, but occasionally will do 150 per hour with the Lee Classic Turret. I bought a used Lee Loadmaster on this forum and...
Back
Top