Search results for query: *

According to Ruger Inside and Out, they added a Pachmayer recoil pad, a stainless release lever,extended back bored forcing cones and a one piece cnc receiver. The older models had a 2 piece receiver that was welded together. The center of balance is slightly reward from the older Red Labels. I...

oops .......double post

I helped a friend with a 6mm. He thought something was wrong with his rifle, when he tried the Superrformance 95 sst. I couldn't call it a pattern let alone a group. I never saw anything shoot so bad. I bought a box of core-lokt's and shot 1 to 1 1/2 " groups. They sst's didn't like his gun.

I have a M&P Sport and have no complaints. It shoots very well with bulk 55gr Hornady's. I am glad things are getting better for you.

I am using CFE223 in my SW Sport with Bulk 55gr Hornady FMJs. I fired 30 rounds through it and cleaned the bore with Butch's Boreshine. After getting the patches to come out with no black carbon I left it soak for 15 minutes and ran another patch down and got no blue on the patch. I repeated the...

I have tried a lot of loads in my .243 RAR and everyone would group 1.5" or better at 100 yards off a bench. Most would do consistent 1" 3 shot groups. I settled on 36.5 grs of Varget with a 85gr Sierra HPBT for whitetails. I also had good luck with both Sierra 100gr Game kings and Pro hunters ...

I have had a LNL for several years now and have lost track of my rounds. I have loaded 380's, 9mm, 38 special, 45acp and 5.56. I love it. I had to go through a learning curve also. I solved most of my problems on THR. My biggest problem was the primer feed. I polished the shuttle tray with Flitz...

I use the rifle rotor when using Trailboss with the LNL powder measure and find it very accurate. Not so with the LNL pistol rotor. I load 45 Colt lead 200 gr RN Missouri bullets with it for shooting steel.

I can do the Mark 111 22/45 easily. I watched the videos on Rugers website and could get it done. I also replaced a lot of the parts with aftermarket stuff. However, I couldn't reassemble a Blackhawk. I had to tear up my man card and send back to Ruger:) To Rugers credit, they paid for shipping...

The NRA 500 in Texas!! Afterwards they should show Schindler's List to remind everyone what can happen to a society disarmed by its government and why the second Amendment has nothing to do with how many rounds I need to kill a deer.

Mine would do the same, only on the second shot. When you load your mag, try letting go of the tab on the side of the magazine after loading each round to seat the ammo. If you pull the tab down and let the rounds fall in with out seating them they seem not to line up correctly and cause the...

PA seems safe. A few Phithadelphia legislators are introducing some new restrictions. However they have no chance of passing. PA would be a red state in the Presidental elections if it were not for Philthy.

The NRA has pulled out also. http://mynortheastoutdoors.com/nra-withdraws-from-eastern-sports-outdoors-show-due-to-reed-exhibitions-decision-to-ban-modern-sporting-rifles/

This is a list of more vendors pulling out. http://mynortheastoutdoors.com/esos-boycott-supporters/

http://www.witf.org/news/2013/01/cabelas-inc-pulls-out-of-next-months-eastern-sports-and-outdoors-show.php Do to the organizers decision not to allow modern rifles or accessories to be displayed. Many other vendors are pulling out also. Thank you Cabelas.

I have the American in a .243 and love it. I have shot it out to 500 yards with much better accuracy than I expected. I am using 36 grs. of Varget with a 85 Sierra HPBT. 40 grs. of IMR 4350 with the same bullet is working great also. The rifle is light, has a short bolt throw and a nice safety...

I have the RA in a .243. I love it. I am getting consistent MOA groups at 100 & 200 yards with my handloads. The bolt is smooth. The mag is flush. The trigger is about 3.5lbs . With cold hands in deer season the trigger is perfect for me. It is light weight for easy carrying. I can use it in the...

Here you go. http://www.jamescalhoon.com/ Click on the price list then scroll down to the bottom of the page. It drops right in. No tools needed. It is machined steel and blued. It will last as long as your rifle does :)

Vern, Thanks for the excellent post. I use lil gun with 40 gr vmax and the Lee collet die. I have a single shot follower for my CZ as they will not fit in the mag. I have some 35 gr Vmax bullets I am going to try again. I am also going try the washers when I size the cases. I never thought of...

This is the first I heard of the dimple. I just got done doing 5.56 LC Brass. This is the first rifle brass I did on my LNL. I ended up hand priming them to get them fully seated. I have a Sinclair hand primer and I had to give them a good push to fully seat them. After reading this, I did a few...