Search results for query: *

  1. R

    .38wcf?

    Also known as the 38-40 ctg. I don't have a lot of experience with the ctg. I used one for cowboy action shooting a short time with black powder. It was a hoot to shoot.
  2. R

    S&W revolver chambers different sizes (same caliber)

    Have you cleaned the chambers ? Prolly need to scrub those chambers, could be crud build up keeping the rounds from seating.
  3. R

    professional scope mounting, Virginia beach

    If you just gotta have someone else do it, go to Bob's Gun Shop on Granby St in Norfork
  4. R

    Will be doing Professional HOT BLUING this winter

    Thanks for the update Bobby. I plan to send you a couple of more Remingtons
  5. R

    .223 squirrel gun

    Ahhhhh..... Squirrel tails and ears don't make to good a stew. I think Skeeter said that a long time ago
  6. R

    which pin?

    Make sure you package and label the parts well. This will be for the person handling your estate to know exactly what they are for.
  7. R

    Remington 1148 question

    The Mohawk was the plain jane and the last of the 11-48 series if I 'member rite. Robert
  8. R

    Need help 11-48. 410

    Try Vintage Arms 256-534-9292. Ask for Chris.
  9. R

    Need help. 11-48 410 shell latch

    Try Chris at Vintage Guns,256-534-9292. He might be able to help you
  10. R

    Problem with my new old 11-48 12ga

    You need to use at a minimum a 1 1/8 oz load. These guns are recoil operated, no gas system. Also lube the mag tube with a light coating of 30 weight motor oil, take the spring off and apply the oil and then put the spring back on. It should work well. the 7/8 oz doesn't generate enough force to...
  11. R

    11-48 410 cycling problems

    From experience, use 30 weight motor oil on the outside of the magazine tube under the recoil spring. Then use something like CLP or Slip2000 on the internals.
  12. R

    Will be doing Professional HOT BLUING this winter

    Pics of 11-48, Mr Tyler did an excellent job on this beat up 11-48.
  13. R

    Will be doing Professional HOT BLUING this winter

    Just got my 11-48 back. It was the one my Dad had for many years. It has a lot of miles on it from dove and quail hunting. It has been over under and through rabbit patches and on numerous duck hunts over the years. All I can say is it looks Fantastic! It was in pretty sad shape. I will...
  14. R

    Remember 1960's Gun Deals (Gun Shows, Mail Order, Dealers, & Individual)?

    Anyone remember Bannermans. I thought that was the greatest gun dealer out there. I spent a lot of my burger flipping money there.
  15. R

    Feasibility of rechambering a Model 28

    Converted a 28 to 45 Colt several years ago. Re-bored the cylinder and replaced the barrel with a 1950 45 bbl. It's a great shooter. This was done before Smith brought out the 25-5
  16. R

    RCBS Crimp Die too long for 550B?

    I would also call Dillon tech support. Those guys are pretty sharp about the different dies that are out there
  17. R

    Dillon spent primer chute

    Paper clip works great
  18. R

    do you have to degrease a dillon powder measure

    I have several Dillon Loaders and Multiple toolheads with their dedicated powder measures. You need only to wipe it down with a dryer sheet once in a while to remove the static build up. Do Not use any oil or grease on the powder measure slide.
  19. R

    *Smith Wesson .357, model 27-2, 8 3/8inch barre

    Go over to the smith&wesson forum and search the for sale area. Search the sold mod 27's and you most likely will find out what a fair price will be.
  20. R

    Which optic for M1A Socom II

    That big old peep sight works just fine for me and I'm 65. never have seen the needfor optics on an M1a
Back
Top