Search results for query: *

  1. G

    Quad Rail covers

    They look like knights armament.
  2. G

    One in a million AR15 issue

    Make sure there is no damage to the bolt. Saw a guy with an M&P sport that had some primers blowing out. On got stuck in the bolt lugs I guess cause he was doing fun be then it turned to a single shot. Even manually operating it you could feel it bind. Had a spot on the side bolt by the lug...
  3. G

    AR15 Upper and lower fit affect accuracy?

    If you have an upper and lower that are both within spec the amount of wobble is so small that it won't make a difference. If you have enough wobble to have it affect accuracy then it's either not made within spec or it's worn out. There are a lot of things that will affect the accuracy more...
  4. G

    Barrett REC7 - to buy or not to buy

    Buy it. If you decide you hate it you'll have no problem getting rid of it. 6.8 is my favorite ar round. It performs very well out of barrels all the way down to 11.5 inches. Search around on 68 forum and see what they have to say.
  5. G

    Short stroking AR15, what am I missing?

    What brand were the other 3 barrels. Psa has bcg on sale for super cheap right now. I'd pick one up and give it a try. Worst case use it in your new upper. It sounds like your other barrels were probably overgassed so it masked the problem. BA barrel are conservatively ported. What brand is your...
  6. G

    How hard is installing an LPK?

    The hardest part is getting the roll pin for the bolt catch started. Everything else is pretty simple. Just make sure your springs are in the correct order. Its easy to find install them backwards. I'm sure there are tons of YouTube videos.
  7. G

    Help me pick out an AR for a buddy, $1500 including red dot

    Look for a lightly used bcm or dd and go with an aimpoint pro. Should have enough left over to buy some mags and ammo.
  8. G

    Learned something about gasblock compatibility with handguards

    It didn't seem to affect accuracy but this rifle is only intended for short range. I'll try to post pics. I only have a phone for a computer and I have a hard time posting pics.
  9. G

    Learned something about gasblock compatibility with handguards

    I've been wanting a 14.5" ar for sometime so I decided to build one. I started with a DD upper I already had from a complete rifle. I wanted the whole upper to be DD but they don't offer a gasblock that isn't clamp on (you can't buy barrels from them so getting on with a pinned gasblock isn't an...
  10. G

    ar15 bargain.

    If your not sure about the stock I'd go for the collapable. If you decide you want a fixed you can get a magpul fixed carbine stock. Its a fixed stock that is made for a carbine buffer tube.
  11. G

    Will 6.8 run in 5.56 mags

    You can use 556 mags but you can't load as many rounds in them the 6.8 case are a bigger diameter and will start to bulge the sides of the mag. For target pratice i have a ten round pmag that works fine for 5 shot groups. Any more than 5 and it starts to bulge.
  12. G

    People who work at gun stores

    So i walk into a local store and ask to look at a couple of their ar15s. The guy at the counter tells me its a preban (marked restricted leo/mil) and all I have to do is put a spring in it and I can make it a full auto. I informed him it was a post ban and it takes a lot more than a spring to...
  13. G

    need help. sight in is odd?

    Some scope dials are marked for the bullet impact some are marked for the scope crosshairs. Try moving it in the other direction.
  14. G

    AR Outside Barrel Rust

    I use hi temp black grill paint on all my barrels. Wipe them down good with a coat of oil make sure all rust is gone. Use some brake clean to get off all the oil and then put 3 to 4 coats of paint. Dries very fast so there's not a lot of time wasted between coat. I'm in florida with lots of...
  15. G

    The Difference a Factory Load Can Make

    So many people get caught up with how many rounds in a group. In reality the first two shots are all that matter. If they hit your target where you want thats all that matters. No one does five shot groups on a deer. If it takes you five shots there's something very wrong.
  16. G

    Swapping bolt carrier groups between AR15 uppers

    If it was me I'd use the bcg you have. 200 rds isn't enough to matter.
  17. G

    started with a PSA kit WHAT upgrades would you do?

    If your talking about building a rifle with better parts than the DD, a 450 dollars PSA is going to need a lot. First the barrel, the DD is cold hammerforged. To get a chf barrel whether from psa, bcm, spikes, or dd thats 300 dollars. Then comes the handguard, can you get a good handguard for...
  18. G

    Folding Stock AR

    Rock river makes a piston ar that has a internal buffer system like an ak. I like the pistol version.
  19. G

    AR shot stringing.

    What brand was the bolt?
Back
Top