Search results for query: *

  • Users: cheep
  • Order by date
  1. C

    Shotshell reloading - What would you tell a Beginner?

    Use that MEC reloader following published loads, get used to it before moving on.
  2. C

    California Laws on Ammunition

    RESIDENTS can only bring in 50rnds of ammo into this state, even if they transported it out and were going to bring it back...
  3. C

    Colt Delta Elite 10mm

    Are you crazy??? In California that would be an insane deal. I'd buy it.
  4. C

    Lee 158 grain rnfp mold

    Use data for the heavier bullets to be safe.
  5. C

    Powders and bullets for a 223 with a 1 in 7.7 twist 24" long barrel

    My White Oak Varmint with 1in7 twist and wylde chamber likes 69 SMK with 24.3gr Varget to shoot .375 @ 100yd.
  6. C

    9mm extreme bullets?

    Mine measure .356. They recommend using mid range jacketed data, Accurate powder shows data with plated bullets, I use AA#5 5.8gr with extreme 124hp.
  7. C

    Ed's Red - how do you make it?

    You can store this in an old engine oil or atf plastic jug, that's how I store acetone.
  8. C

    How powerful are primers?

    A Win209 in a bored out 223 case with a 22 cal pellet equals approx 500 fps in my Mini14.
  9. C

    Reloading 5.56mm & .223 Rem.

    I use 748 for light bullets and Varget for heavy. I have used H335 and H322 and both work good for light bullets.
  10. C

    9mm powder choices

    I tried WST but it really fills the case. My go to for many thousands of rounds is AA#5.
  11. C

    Just for fun Worst metering powder you have ever used

    Varget is tough, unique is not super consistent but is very forgiving.
  12. C

    Ball powder for heavier bullets

    W748 and 69 SMK's work very good in my 223 with 1:7" at 100 yards.
  13. C

    9mm oal

    I load my 124grn Extreme to 1.10", don't worry about it.
  14. C

    Best Powder

    I've used Unique and now am using AA#5-that stuff goes a long way.
  15. C

    Un-sticking a old Beretta

    The gun may be gummed up from very old lubricant. You might want to soak it in some type of solvent warmed up a bit, be careful warming up the solvent...
  16. C

    Winchester 231 hard to find So Cal

    My goto load in 9mm with 124grn plated is 5.5grn AA#5.
  17. C

    High Standard Modle H-D Military

    Those are good shooters, ask him if he wants to double is money...
  18. C

    punch for sight install

    A spent 22lr case over a punch... or a sight install tool.
  19. C

    Finishing metal that you had to file?

    I use Brownells Oxpho Blue and oil when dry.
  20. C

    question about 9mm sizing die marking the case

    Do you get that when you size or seat/crimp? Which die leaves the marks???
Back
Top