Search results for query: *

it fits in the mag and chambers fine.but it's not no where near the cannular does that matter

made me a dummy bullet and put it in my 308 savage model 11 and took it out it measures 2.832 how far should i seat it.going to be useing lc match brass, varget and hornady 165 grain btsp

whats fire forming mean.ain't been doing this long. just been teaching myself i know i read something about that somewhere.but don't remember.thought this was gonna be easy. it's alot tougher than i thought.

30cal you the man turned the die down 1/4 turn works great now thank you

got some lc match 308 cleaned and sized it bolt closes real hard put some marker around the shoulder and seems thats where it is hitting is there anything that can be done about that.

brass has been fired. have to process it and the primers are not crimpped

got 500 pcs of 308 brass marked lc match for 18 dollars a hundred today they have numbers ranging from 63 to 67 guess thats years? is this stuff any good and can i reload it for my savage model 11. and where should i start thinking of useing varget win primers and 165 gr hornady btsp bullets...

i may not no what im doing but i can read im useing the hornady manual and it starts at 33 gr and ends at 38.4 thank you very much.

wish i had time to find a loading buddy.im single and between work and careing for my daughter there is no time left.my daughter is dieabetic and has kidney failure spend alot of time at the dialisys center. as far as reading something on reloading i have read the reloading manual i got with my...

im trying h4895 i have never tried varget i started with 748 because the shop said it would do for all the rounds i wanted to load 223 308 and 35 rem works great for the 223 and 35 not so good for the 308. dont see how people can afford so many different powders.i had pressure problemes on a...

once fired brass range p/u. sizing full length.seting to the length the book says 2.740 haven't tried any other powder im allready powder poor. i don't have much money and just can't afford to do the expermenting that i see some do. thought this reloading would be fun it's turning out to be a...

have a savage model 11 i ca n get 165 hornadys to shoot great but no matter what i try i can't get 180's to work.trying hornady 180 flat base sp interlock. on the low side of hornady data the accuracy sucks on the high side the primers flatten but the accuracy is good. tried win 748 and 4895 on...

got a good deal on some federal magnum large rifle primers today would it hurt to load behind varget in 308

hi. bruce from asheville nc. i have hunted my whole life never had many guns.always got things done with my 1903. as far as im concerned the greatest weapon ever built. but today i have a savage model 11 chambered in 308, a 1945 model 35 marlin a dpms ar15. 2 22 marlin model 60 a xd 40 and a 380...

well i guess ya all figured out im a rookie but tried everything finally got the pressure problemes under controll with the 180's with 748 had to get down to 39 grains but accurcy sucked.so i borrowed a little varget from a friend used several different loads but got 38.5 to do the job 1 little...

been reloading about 2 months. took a class b4 i started. as far as poweder i only have 748. was told it would make a good all around powder for what i want. don't have money to try alot of different things.checked the scale by weighing the bullets they all weigh around 180. pulled the rounds...

load some 308 using 180 gr hornady sp flat base with cannular used win 748 45 grains win primers set them to the depth the book said. used mixed used brass and crimped them with a lee factory crimp. well it blew one primer right out of the case an flattened 2 others and the bolt was hard to get...

1 bullet depth get random depths have a hornady classic basic set. cases trimmed to all same length. if that makes a differance. loading 40/223/308 and 35 rem. on 223 trying for a 2.240 getting everyting from 2.230 to 2.245 #2 on my 35 the bullet when i put it in just sinks into the case dies...