Search results for query: *

  1. 5

    Down at the Old Mill

    Start buying all the 80% lowers you can!
  2. 5

    Recommend a new Folder

    Kershaw Blur, by far the best knife for the money. Spring assisted, clips inside your pocket, different blades to suit you...
  3. 5

    New 50BMG Owner

    Yeah, for a quality scope that can hold up to a .50 and has enough MOA to get you to 2000+ yards. You can look at spending $2,500+ these days and not blink an eye. Back in 2000 when I bought my Nightforce it was $1,800, so the price of them and others now is about right considering the upgrades...
  4. 5

    New 50BMG Owner

    Which Mk-8? Leopold has one that costs $6,100, don't think many people will buy one. I'm sure it's marketed towards the military and law enforcement.
  5. 5

    New 50BMG Owner

    One other thing, save your brass so you can reload it. New brass is about $1.50 for regular and match brass is about $4 each.
  6. 5

    New 50BMG Owner

    If you do start to reload, K&M makes some of the better case prep tools for working .50 brass. Just do a Google search on them and they'll pop right up. Hornady's AMAX are great projos to use and brass solids are another option for accuracy. Problem is that they are expensive, they run on avg...
  7. 5

    Yet again, the AR15 becomes the root cause

    There was an off duty police officer working security, he engaged the shooter prior to him getting into the night club. So there was a level of safety provided to the people who were there. The police officer probably saved lives by spotting him and engaging him prior to entering the club...
  8. 5

    Yet again, the AR15 becomes the root cause

    He was in a gun fight with an off duty police officer prior to going into the night club. Muslim born in NY, saying that he was radicalized and known to law enforcement. Regardless of any of this, the antis will twist the story and make it the guns fault. They won't make any issue of the...
  9. 5

    New 50BMG Owner

    How tight is the match chamber? I ask this as you might not be able to shoot some ammo unless you turn the necks on the brass. That means that you'll need to start reloading. The Griz is a shellholder design, just means that you have to remove the bolt, place a round on the bolt, insert into...
  10. 5

    Household Ammonia For Copper Fouling?

    With modern cleaners/surfectants, why would you want to expose yourself hazardous chemicals? Boretech's Eliminator, Wipe-out and Slip2000 will do the job faster and safer as they are 100% non toxic. Clean smarter and safer, ammonia can mess you up quick, be sure to use in a well ventilated...
  11. 5

    .30-30 Cocking handle.

    Mine is a Winchester, thanks for the links. I did see one on muleman's site that looked good and gave me an idea for my own. Figure I can cut and weld it back or find a shop that can cut one out with a water jet or something similar. I still don't want a hoop, just to make the factory loop a...
  12. 5

    .30-30 Cocking handle.

    Does anyone know if the cocking handle is heat treated or case hardened? Having big hands I always find myself using two or three fingers to cycle it which can cause problems. That and I don't like the other alternative of the large loop that looks like having a softball on your rifle. I...
  13. 5

    Band of Brothers on all day. HBO

    To this day everytime I try to buy the set on eBay I get out bid! Finding it in the stores is usually impossible, guess Amazon might be next. I want the full version without any cuts and all the extras, stories...
  14. 5

    Primers for 500 S&W Mag

    Does anyone use a cannalure tool? There are a couple aftermarket companies that make them and you can add another cannalure to your bullet. Multiple ones can't hurt if you don't like the factory one, help change the seating depth to a better place. Just sayin'.
  15. 5

    Band of Brothers on all day. HBO

    I know most have seen it but they entire series is on today just in case you haven't. I've seen it about 10 times but once more can't hurt!
  16. 5

    Primers for 500 S&W Mag

    I would have to say the powder was bad or contaminated by something. Were these your loads or someone else's? If someone else's I would say that they got something in the case that caused a partial burn of the powder. If your loads, you need to think of what might've got in the case, maybe some...
  17. 5

    WCC & WMA 9MM Military Surplus Brass

    As with most new military brass, they use a ring style crimp that in my opinion is worse then the old staked in primers. If you don't remove it, it can cause the primers to get hung up and smashed. For the .50 they're easy to get rid of. I was given a bag of 9mm and it was doable but a pain...
  18. 5

    California set to ban most semi-auto rifles.

    Given the state of bills to come, people are going to have to make a decision. Either resist and run the risk of being a felon in waiting or get on their knees and be a slave! The choice is yours, my bet is that at least 99% of CA gun owners will get on their knees.
  19. 5

    Selling a KelTec SU-16 rifle out of state to California

    He can send you a bullet button and you can install it to make it good to go. The folding stock is what's going to kill the deal. Unless you remove it and ship it with it off the rifle, in the meantime tell him to get a fixed stock. He can keep the folder and if he ever moves out of CA he can...
  20. 5

    Meanwhile in California...

    Resist! Do not register your weapons, period! Tell a friend and tell them to tell as many friends as possible. What are they going to do if no one registers? Civil disobedience is the only way to go if this passes!
Back
Top