230 JHP
6.4 grains Unique
915 fps
120 OAL
Mixed LP once fired brass
6.4 grains is at the top end of "standard" loads and most +p loads are around 950 fps from what little research I've done. I don't do much shooting, just plinking on the weekends and paper punching. This load shot...
I've had several misfires from my sig 220. I've read about light primer strikes and initially thought the malfunction was the gun, not the primers. My sig 1911 shot these primers just fine. My 220 still gives a lighter primer strike and won't always set them off. They are Winchester LR or LP...
.308 175 grain berger 43.3-43.7 grains of 4064. No sticky bolt or any other issues and the listed max is 45.6 (depending on where you look). I have them seated at 2.877 and 2.93 is touching my lands.
I know how helpful specific searches can be so I wanted to share my results thus far.
I used up all my 2000 mr powder with average at best results. I have moved on to IMR4064 since my uncle has 8lbs of it that I have access to.
Here's my first load:
43.5 grains IMR 4064
175 grain VLD...
I searched and didn't find a dedicated blackout thread, forgive me if I missed it.
My dad has an AR blackout and wanted a decent load with the 110 grain V-max. After tons of reading this is what we will try.
Hodgdon H110
110 grain V-max
Federal AR small rifle match primer
Remington...
Hello from Arkansas! I'm fairly new to the reloading scene but I've grown up with guns, shooting, and some exposure to reloading. I successfully loaded a nice .45acp load and have moved on to my first rifle loads.
I know magnum primers may not be the best choice, but they are used frequently...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.