Search results for query: *

  1. R

    Sighting in a Laser

    I have a Ruger SR9C with a rear sight LaserLyte laser. What I was wondering was, can I sight & adjust the laser by using a bore sight laser in the barrel, turn on the laser, and adjusting it to the same dot projected by the bore sight laser? If so, at what distance do I adjust it to? This is...
  2. R

    Changing different powders

    Checked Alliant site and they only show 3 9mm recipes, and they are for GDHP's. Not too informative site.
  3. R

    Changing different powders

    Do you guys have any good recipes.? I am only loading 9 mm at this time. The two new powders that I have are Titegroup and Power Pistol. These are the bullets that I'm using: 115 grain flat point Precission coated bullets, 115 grain round nose plated bullets, 115 grain RN coated bullets, 124...
  4. R

    Changing different powders

    I am changing from HP-38 to either Titegroup or Power Pistol. I emptied all the powder from the powder drop, but there is still some (very little) sticking from static on the side of the drop. Will this minute amount be a problem with either of the other two powders or should I blow it out with...
  5. R

    POLL: Which IWB Holster do you use & why.

    Both of the above holster are Hybrid , leather backing and kydex holster.
  6. R

    POLL: Which IWB Holster do you use & why.

    I was leaning towards one that you can change out the kydex for different pieces for different guns. That way you don't have to buy a whole new holsters for each gun, and has retention adjustment. The only ones that I know of at this point are, AlienGear Tuck 2.0, for $35.88, and one made by a...
  7. R

    POLL: Which IWB Holster do you use & why.

    I am trying to decide what IWB I want, and know nothing about comfort, since I Have never owned one. So your replies and comments will help me decide. Thanks
  8. R

    9mm Recipes Using Pistol Power

    Yes, I meant Power Pistol. I have Lyman's Manual (hardly anything in it), and Lee's, and I don't see a whole lot there on this powder.
  9. R

    9mm Recipes Using Pistol Power

    I have checked Alliants website and have checked some forums, but was wondering if anyone has some personal experience and recipes with Pistol Power. I will be using this for target shooting at the range, and want something with good accuracy. The guns I will be using is a Glock 26, Bersa...
  10. R

    Best Powder

    I just stopped at a sporting goods store last week, and was talking to the sales person and was showing me Bullseye, BE-86, Unique, and Pistol Power, and he told me he likes PP at 5.0gr for his 9mm, so I picked some up, but still looking for some CFE.
  11. R

    Best Powder

    I have looked at the manuals and it seems like the one most widely listed across the board looks like Accurate #2
  12. R

    Best Powder

    Is there an agreeable choice made by many, of a particular powder that is a good choice for 9mm in both 115gr plated or coated, and 124 plated or coated, both RN & FP?
  13. R

    Bullet Feeder Adapter for Hornady LNL AP (Review)

    I agree. I could hardly ever get the Hornady bullet feeder die to work. Always having to poke something up from the bottom to get them to snap into place. No matter how many times I adjusted the collets, or adjusted how much belling I had on the cases. Bought the MBF die and works great.
  14. R

    Clear tubing for Lee Multi-tube bullet & case adapters

    Does anyone know where I could pick up some clear tubing the same size as the above equipment? I want to have some extra tubes to load up with both casings, and bullets, to have available when the ones on the press run out. It's thin wall rigid tubing, od 7/16 for bullets, and 9/16 od for the...
  15. R

    Brass Shavings From Reloading w/Dillon 650

    I bought a Mr BulletFeeder Min, and it comes with a re-designed powder funnel. I no longer have any shavings lying on the shellplate..
  16. R

    How do you guys clean your brass?

    I use a tumbler from Harbor Freight and currently using a mixture of ground walnut, & corncob with about a capful of Brasso. I let them run for 2-3 hours, and they come out unbelievably clean and shiney.
  17. R

    Some more questions, sorry.

    I notice a lot of people sort their brass for reloading into brands. I started doing that, but how far do you guys take it? I presently have mine sorted in containers of clean Win, FC, RP, and mixed. The mixed has some Speer, Blazer, Tulamo, GFL, PM , CBC, Perfecta, etc.. How far do you take...
  18. R

    Press Counter

    Does anyone know what the number of primers that are left in tube and disc, after the primer low alarm goes off, roughly? On the Dillon 650. I know it is quite a few.
  19. R

    Press Counter

    I have a Dillon 650, and was wondering about putting a counter on it to keep track of reloading as well as use on press. Does anyone use one? I saw several on EBay for around 35.00 and wasn't sure about getting one. Strange started out with a $566 press, that has now gotten close to $1000.
Back
Top