Search results for query: *

QUOTE: "With the introduction of this new source of energy, arms manufacture attained record levels. In addition to Orbea, Larrañaga and Joaristi, the main manufacturers, other new names appeared, such as Victor Sarasqueta, Arizmendi, Trocaola, Aguirre, Zamacola y Cía, Crucelegui, Anitua...

This was left to me years ago and I just finished putting in a modified Wolf S&W Hammer Spring and going over the complete gun. Cylinder Gap is well within specs. and it locks up nice and tight on hammer fall. Cylinder latch is also tight but the Old Gal sure doesn't have much Blue left. I think...

All good advice but you also want to go after the Square Hole in the disconnector with some 600 or 800 Grit Wet Paper until you achieve an nice polish in this area. Creep Hides Here Also.

It all depends on the finish you want. I happen to like a Natural Finish and use the Military Dark Walnut Stain in the last pic. Appling 1 coat and then another after the first dries for several days. Rubbed with Extra Fine Steel Wool after the last coat dries for several more days,then polished...

Here's a Quick Trick Park Fix. Clean with Acetone several times where you need to fix the scratch. Now get a Q-Tip and dip in Birchwood Casey's "Aluma-Black" that's right no misprint. Use the Q-Tip and follow the scratch and when it turns color wipe off. Reapply until desired color is attained...

As of late I have been getting more and more of either AK Projects that are unfinished or hammered on to the point of It Ain't Gonna Shoot. I thought maybe a short revisit to the basics might help those that fall into this category. Riviting seems to end alot of projects. *Hint if the first...

Hockey Pucks Lots Of Hockey Pucks

After Bead Blasting "In The White" and after Black Parkerizing or final finish.

The Bolt Carrier Is Dragging On Something As you said it works fine running on Hintenberg SMG Ammo. Check the recoil spring rod for burrs. Also check the spring itself and make sure it is an MP5 Spring and not broken or kinked. I really don't see the Rollers being the source of the problem as...

Weapon In Vid Is A 17 Conversion Very much like my Post Sample pictured here. And you Can control them with a little practice 500 Rds. or so. Semi Mode Full Auto Mode

I Did Not Know That Tuner I had some time to kill last night so I was chasing some of the links folks send me and came upon THR. Started reading and there it was the Saga of "Sample Dave And Tuner". Followed a few of his posts and went to the linked GS site looked over Grand Master "D"s...

Here Are A Few Things To Check First off you say it extracts fine just doesn't eject right. Not a barrel problem so cross that off your list. The SW 5's are not highly regarded for their Mag Lock Up. Sounds like a mag sitting to high and the bolt carrier dragging across the lips with US Factory...

Tuner Just Wanted To Say Hi Found you crusin some links. How goes it man? I see you and Sample Dave are still at it:banghead: I thought he'd be dead by now from all the chest beating he does:rolleyes: Some Spit never changes son does it? The man is wastin his time with STEWDENTS When he...