Search results for query: *

I thought some of you might get a kick out of this! It really helps keep the barrel cooler on my 225 viper. I usually chamber it for 2-3 minutes between shots at the range. normal old walmart bait bubbler. drilled the primer pocket out on one of my old cases, and shoved the air hose in all...

Hello all! I have a cartridge that is similar to the 22-6mm rem. It is .176 longer case than the 22-6. Needless to say, it likes powders in the RL22 burn rate. I was just wondering if the vvn560 might give more velocity/ better accuracy than RL22. Thanks for any replies.

Finally got my 22 project finished. Always wanted to build a high power 22 for hunting. Had a 220 swift at one time. Shot several deer with it, but pretty meesy. Anyway, i thought the wssm was impressive when it came out, but many negatives came from it early, so i never got one. Now...

Guys, i never in my wildest dreams knew what you guys have gone through with load dev. I know now!! The best powder ive found so far is h4350. I am getting 1moa accuracy at 100 yds w/o a sled at 3,600 fps with slight pressure showing. That cci 250 took the pressure curve out of the h100v...

Recently, i improved the 6.5x65 RWS cartridge. Basically, blowed shoulders out to 6.5 creedmoor dimensions. For those of you that know, rws brass is VERY STRONG brass. I fireform using 48 gr 4831 with a bullet into the lands. Works pretty well. Anyway, when i started load development, i...

Hello gents, i spent the last year working on a cartridge design to duplicate 257 roy performance in a 6.5 mm. Bored out an mgm encore barrel to accomodate the 6.5x65 rws case. I fireform to blow the shoulders out to .462 with the 30 degree angle of the creedmoor. All that is easy, load...

Hello all, i recently designed a cartridge similar to the 6.5-06 ackley. It has 30 degree shoulder, with .462 shoulder diameter, 2.5 inch case length. I am using 6.5x65 RWS brass to form the case. So far i have tried 3 powders. Best 100 gr ttsx velocity on each 7828 ssc=. 3,340 @ 61 gr...

Hey all. Im wondering if anyone has had redding build them a custom body die. Although i probably wont reload them more than 3-4 times, my 6.5 hi-power needs one! Im wondering what their lead time and cost is. They are on vacation right now or i would call. Im not finished load testing yet...

Hello out there. I recently built a TC prohunter configuration with an mgm 26" barrel in 6.5x65 rws improved. Ive been looking at data on 6.5-06 ackley and 25-06 ackley. Cartridge is Real close to 6.5 gibbs or sherman. I have shot powder ranges in 7828 ssc and best velocity was 3340 at 61 gr...

Hello all, new to this forum but wanted to share a long awaited moment. Also looking for some advice. Built a wildcat cartridge off of german 6.5x65. Improved the cartridge by using a creedmoor reamer run deep. Ordered an mgm barrel in 6.5 creedmoor for tc prohunter configuration. Chamber...