Search results for query: *

Thanks for the replies. My testers all seemed to mimic previous loads with CCI primers.

I like my RCBS puller. https://www.rcbs.com/dies-and-shell-holders/bullet-pulling/standard-bullet-puller-without-collet/16-9440.html

In the middle of switching from CCI 500 to Winchester SPP's.(Got to use what you have/can get). Building some new ladder loads for the new/different primers for testing when the weather cooperates. Just wondering what you more experienced reloaders have found when changing primers only...

The 147's have been lying around for a few years and never did anything with them. Maybe I'll plunk some in my Beretta pistol instead and work a ladder for that. Don't want to end up with a stuck bullet in a barrel. Worked up loads for every other 9mm bullet that was lying around (mostly 124's)...

yes I saw that before i stopped off here. thanks

where does sport pistol land on a relative burn rate chart. the only two charts (old) i have don't list sport pistol

Thanks for the info and insight. Think I'll go with CFE Pistol w/ a COL of 1.15 (1.164 minus .015) w/ loads 3.7, 3.8, 3.9, 4.0 gr. Once fired range brass, trim length .750, Winchester SPP Sound like a safe plan? (This is my load plan and will ultimately be done at my own risk) Bob

HI Guys, trying to tap into the vast knowledge @ THR. Looking to verify loads for Berry's 9mm 147 gr RN Plated.for my Ruger PC9 Carbine powders on hand: CFE Pistol Titegroup HP-38 Power Pistol Sport Pistol Looked up sample loads in Hornady 10, Lyman 50th and the LEE Modern Reloading 2nd...

RCBS Flash sale https://www.rcbs.com/

bump

Hi all, Looking for a replacement for the Dextron 3 in my Ed's Red recipe, There was some in the garage from a vehicle I no longer own but that supply has run out. Can't seem to find any. Is there a preferred replacement or will any ATF work OK? Thanks, Bob

none taken :cool: we know what we have!

oops. :uhoh: Bob

you're welcome

.620

here's a thought. others will have their own. https://www.rmrbullets.com/shop/bullets/rifle/224-5-56mm/224-75-gr-premium-boat-tail-bonded-fmj/?attribute_pa_count=1000 Bob

Really, nobody!!!

anybody try these seconds from RMR? https://www.rmrbullets.com/shop/bullets/rifle/224-5-56mm/224-75-gr-premium-boat-tail-bonded-fmj/#reviews any pet loads yet? just got some and wondering what others have found. Thanks, Bob edit: correction - these are Total Metal Jackets

well , if you're in mine neighborhood you can stop by and i'll give you a couple boxes. ;)

Apparently there aren't enough projects around my house ! On a whim, i ordered some Geco brass cased cartridges with reloading in mind for my CZ527 (and my Chinese SKS to a lesser degree). New to reloading (2 1/2 yrs) and only have worked with .223 and 9mm. Wondering if anyone else here have...