Search results for query: *

  1. wrench459

    Loading 9mm for a short barrel

    All around pet load for my short bbl and PCC. 6.4grains of power pistol 1.120 COAL EGA 124gr JHPV2
  2. wrench459

    9mm MAJOR... Have any pressure data?

    This might help https://forums.brianenos.com/topic/80070-9mm-major-pressure-levels/?do=findComment&comment=932576
  3. wrench459

    9MM Primer Test

    Thanks walkalong for your test results. Next up is pocket pistol testing?
  4. wrench459

    Reload for Ruger PC carbine 9mm

    Keep in mind that with full power loads. The fastest that you can push most jhps is around 1500 fps.
  5. wrench459

    Reload for Ruger PC carbine 9mm

    My SAAMI spec PCC will cycle all factory loads. The pet load that I like 6.4grains of power pistol @1.120 124gr ega jhpv2. I played around with a home made cartridge measure(aka 9mm comparator)made from scrap metal laying around. Speer 115 gold dots with a loaded oal length of 1.122 I got...
  6. wrench459

    9mm carbine keyholing.

    I took a stab at measuring my 995ts twist rate. Used a loose fitting jag with a patch...seems to be ~one turn per 10 inches
  7. wrench459

    9mm carbine keyholing.

    My 995 is close to a tack driver @ 25yds with 124gr JHP's.
  8. wrench459

    Which Bullet Weight

    How concentric are your loaded rounds? I've heard that .0015 is very good.
  9. wrench459

    Favorite Load Recipes for CFE Pistol

    I've noticed that even full power loads feels soft in my planet of the apes carbine. Which of course allows "accurate" rapid fire follow up rounds.
  10. wrench459

    COAL questions

    I like to load EGA 124 V2 bullets. They set ~.208in. into the case... depending on case length.
  11. wrench459

    10mm question

    For want it's worth I load XTP's longer with a bit more powder.
  12. wrench459

    Reloading for Ruger PC9

    My pet load for the 995ts is. 1.120, 124g JHP, 6.4g of PP
  13. wrench459

    9mm using Win231

    Whenever changing the bullets around. I like to run a few dummy rounds to find the max. length to the barrel. The ogives can and will change.
  14. wrench459

    Case Mouth Expander Dies

    Thank you for supporting the Mr. Green Jeans movement. You might want to remove the insert and install the Red insert so that you can use quarter turn dies.
  15. wrench459

    Better powder than Bullseye for 9mm and 45acp.

    Have you thought about Black Powder?
  16. wrench459

    Pick for .380 ammo

    Empty the mag. Or until the threat is stopped.
  17. wrench459

    Lee Powder Measure

    With my Mr. Green jeans powder drop. I'll need to get into a certain rhythm. Tick-tock
  18. wrench459

    Proper Disposal of Hornaday's One Shot Solution

    Grilling a nice steak or a fine set of ribs on the bbq is enough for you to be flagged in Cal. state.
  19. wrench459

    Gold Dot reloading bullets 357sig-9mm

    A simple "plunk" test will give you the oal with 357sig bullets.
  20. wrench459

    Gold Dot reloading bullets 357sig-9mm

    Cool thanks for the info. I've got a kissing cousin to the PF9. The short bbl. is around 100fps slower than book values. Not that I never go out-of-book loading.:) Please keep us updated on how well they feed.
Back
Top