Search results for query: *

I am using 125gr Xtreme bullets and want to try Titegroup. Loads for cast are 4 -5.4 and loads for jacketed are 6.8 - 7.5. Where should I start for mid range loads?

I am looking for loads using Herco and 125gr bullet for a 357 mag. Was told to use data for Unique but I cannot confirm that. Thanks for the help.

Will a chassis increase accuracy over a Remington factory stock? Thanks for the replies keep them coming. Thanks again

Has anyone used a KRG Bravo Chassis on a Rem 700? It looks like it come with the spacers and long screws for adjusting length of pull. Is it worth the price? Also I shoot single shot so no need for a mag, does anyone know if a cover for the mag well is available, KRG does not sell one.

My barrel is probably shot out. It was fun to do it especially the sub 1/4" groups. Now what company barrel do you suggest. Lets have opinions. Thanks

By the way in my other barrels I was shooting 34gr Accurate 2520 with a velocity of 3500 fps or there about. I chrono every shot with an Oehler 35P chrono. Bullets are .011 of lands. I clean using Butches every 50 rounds.

I have a Rem 700 with a Lilja barrel in 22-250. This is my third Lilja barrel on this rifle. The others lasted about 2500 rds. I shoot 50 rounds a week using 33gr 4895 with a BIB 52gr bullet. Since I have this barrel a bad day with it was 1/2" groups. I have 28 groups under 1/4", these are...

Bullet is 52gr

I anneal after each firing. There are over 1500 rounds thru this barrel. I neck size only and clean the barrel every 25 shots. Length is check after each firing. The brass has been turned and inside reamed.

Yes. Same rifle Lilja Barrel 1500 shots thru this barrel most days shoot under half inch

Shot my 22-250 last week. Used 33.5gr 4894 and none of the necks expanded after shooting. It is as if I already neck sized them. I have been reloading rifle for 43 years and this has never happened. Does anyone have any ideas as to why this happened. The brass is Lapua that has been loaded...

Thinking, how accurate is the average rifle shooter. If you took at random 100 rifle shooters sat them at a bench at 100 yds and they shot a 5 shot group what would be the mean group size? What percent 2" or more 1" or more 1"or less

I have the Dillon 900 for 5 years. Love it Love it Love it. It takes 10 minutes per 100. No mess, no spilled shot or powder. You must pay attention to what is going on but that goes for any machine.

I shoot at only 100yds. How many thousands off of each cartridge does it take to make a difference in group size? What I mean is if I have a variation of .002 or.003 in ogive to base will that show up in the size of my groups?

Right now I am using the Sinclair Hex Nut in my caliper to measure Base to Ogive. Does anyone know of a better tool? I was looking at the Forster Datum Dial Measurement System. Has anyone used that, or know of something good to do the job?

Is the Lemishine Booster shown in the picture liquid or powder? If a powder how much do you use? Thanks

I live in northeast PA. When I got my wet tumbler last year I bought Lemishine in the supermarket and it worked great. Now I need more so I went back to the same store but the don't sell it anymore. Went to 3 other stores and Walmart no Lemishine. At Walmart online they have a few different...

If you use one are you happy with it. Is it a worthwhile investment? I will be trickling into a funnel with a drop tube to the pan.

Has anyone ever tried these in a rotary tumbler? Just curious

Does anyone have any experience with this scope. I am looking for pros and cons of this scope.