Search results for query: *

Turnbull restaurations sells this mount: https://www.turnbullrestoration.com/gun/dovetail-red-dot-mount-vortex-venom-burris-fastfire-winchester-94-1892-barrel/ I have one for my Winchester 94 in 356 Winchester. Does the job.

How hot are your reloads? Do you anneal? It could be work hardening of the brass. As the brass gets harder, it looses some of its "spring back". It gets close and closer to the real dimensions of the bore. Maybe you have reached the point where you have to full lengt resize. After a full length...

N120 is a fast burning rifle powder. Might not be the best for 308 and 30/30. I have used N133 and N135 for 308. Might work for 300blk.

There is supposed to be a pin you put through the hole to "lock" it open. Sort of like a fixed blade

I load mostly bullets with large meplats. And I have observed that if I am not very careful when seating the bullet (with my hands) into the belled mouth of the cartridge, the bullet is seated crooked. I think it is more likely that the bullet binds, and does not self-adjust when using a...

Thanks @jmorris Just what I needed. After a quick google on how to read a caliper marked in inches, I got the measurements :-) How you guys manage with all those fractions :-)

I know you can order a flat seating plug from Lee. The problem is I live in Norway. And every company I have had dealings with in Amerika demands ridiculous amounts in shipping! If the are willing to ship international. I have axess to a lathe and suitable bar stock. So making on should be a...

I am looking into making a seater plug for wide flat nosed bullets. But I am away at work and do not have access to my reloading dies. Is there anybody with this die available that could take some quick measurements for me? I need the diameter of the plug, the diameter of the flange, the...

When I'm thinking Brush Gun, I think of the act of hunting in thick brush. I think the myth of "brush busting calibers/cartridges" has been more or less debunked. So for me it meens a short handy rifle with a low power scope, red dot or iron sights. Something I can carry in my hands all day. For...

There must be a lot of blood vessels in that area! It really bleeds. I was attending a practical shooting class a couple of years ago, and one of the participants managed three cuts in one night! He was a bit skittish behind the trigger the next day!!

If you're buddy is going for squirrels at 200 meters, keep trying :-) But for deer inside 2-300 meters your already there!

I have not become a member of the "half moon club" yet ( a norwegian frase for the classic cut above the eye). But I felt this stock/scope combo might make me a member :-)

I think he was planning on shooting from above... If the bucket is big enough, you should probably wont shot out the bottom.

I have shot into wet and dry gravel. Can't say I have noticed a huge difference. Wet sand will keep the dust down. I have not tried hollow points, only large maplat bullets in 45/70 and 356 Winchester

A quick update on the project. Mine has 4 holes, so I bought the Talley Light Weight one pice bases. Fits like a charm. The only problem I found was that the intended scope was to close to my face. I had to scoot my head back on the stock to get rid of the "shadows" in the scope. So I decided to...

I've had an update on my chopped Mannlicher (the stock has been cut down). It is the 4-hole version. It arrived in the post yesterday, but I am away working on an oil rig, so my wife picked it up for me. Another reason to look forward to getting home! So now I can start looking at mounting...

I would pick the new Marlin 1895 trapper. I have the 1895 Guide Gun, but the trapper looks like a neat gun!

Interesting ideas! I will have to look into this Manners stock! Thanks again for the information. Always nice to set up a new rifle.

Thanks a lot for the information! So after your smith drilled the fourth hole you are able to use the regular mounts for the 7? Thats a sweet looking rifle by the way. And looks like a nice stock. The previous owner cut back the Mannlicher stock on mine, so I might be looking for an replacement.

I am looking into buying a Remington 7 in 350 Rem Mag. It has the mannlicher stock. I have tried to find some information regarding scope mounting options. I have heard that some 7's have three holes in the receiver and some have 4. Is there somebody who knowes? Any answers would be much...