Kind of off topic but one other way to help the NRA is amazonsmile you can choose the NRA Civil Rights Defense Fund. Amazon may not be the most gun friendly organization but the wife can help the NRA when she shops there.
I have had mine for 2 years, after 1000's of rounds no noticeable wear on the slide at all. Seems to be really well made, even better after the tandomkross bushing has been added to remove the magazine safety, also allows the magazines to drop free. I removed the loaded chamber indicator with...
I use 150 grain plated bullets from xtreme.
http://www.xtremebullets.com/308-s/48051.htm
A Lake City .308 case and Winchester primers.
Start at about 10 grains of trail boss and work your way down by .5 grain increments. The opposite of working up a load.
This avoids getting a...
I do not have to use this powder just have in the past. The extra boom never really concerned me that much. I have to load 30-06 again and figured I would try to find an answer to this issue and a solution. A Schuster plug may be something to try or just get a proper powder. I figure it will...
I do not believe the action is opening too soon. Everything seems to be operating normal, with my loads, LC 1968 ammo and Korean PS from 1974 and 1975.
This batch of wc846 is similar to the 4 other batches I have used over the last 10 or so years. I always rework my loads of each new batch...
I use wc846 for .223 .308 and 30-06. When I shoot the 30-06 150gr fmj and 45 gr of wc846 3.30 oal out of a M1 I get a louder than average report out of some maybe 40% of the rounds which chronograph 2650 fps. This louder than average report is almost always absent from the same ammo in a 1903...
Light one with a propane torch on concrete or some other hard surface just make sure you let is sit for a good long while before you pick it up no wonder they start everything on fire 800 yards away!
My long story about a safe queen
I have 2 M1's I received from the CMP around 2003. One is a field grade HRA 5,800,000 or so with a LMR 1955 barrel, that is my shooter. It was fairly used when I got it but is works great. Just looks like it was used. The other is a service grade...
http://appleseedinfo.org/smf/index.php?topic=3879.0
This is a top rate facility folks!
This is the first appleseed at this range the third for the state this year!
Info at above link
Jason
Appleseed
--------------------------------------------------------------------------------
Hey everybody in Northern Wisconsin/Upper Michigan.
We are planning an appleseed shoot, September 13-14 2008 in Long Lake WI(Forest County). At the Big 4 Sportsmans Club
Chime in here if...
Picard the pit is 3/4 mile west of the intersection of holts and bucks, go west on bucks and past peeks road. it is a right turn forest road 2237 if you are going straight south toward symth road you missed the right turn for the pit. it is 200 yards down a forest service road.
hope this...
I shoot in a gravel pit south east of lakewood. it is near bucks ranch road and holts ranch road. I don't remember the exact road, The wisconsin gazateere has a gravel pit symbol for the pit. The pit is abandoned and located in the nicolet national forest, target shooting is not allowed in...
I use STP engine oil treatment and a 1 gallon zip top plastic bag. A little stp goes a long way. I dip a stick into the stp untill a teaspone is on the stick and wipe the inside of the bag with the stp. Then in goes 5-600 .223 cases or about 250 30-06. shake them around really good to coat...
Thanks for the help I'll look it over good, the barrels are stamped with some metric numbers,
I'm sure the markings are the calibers I'll get back with more info this week.
Greetings,
My father in law got this combination shotgun rifle from his father when he passed away. He said his father brought it back from Germany after WWII. On the top on the ventilated rib is written.
W. BRENNEKE GEWEHRFABRIK LEIPZIG U. SUHL r./TH
My father in law said it is a 16...
http://www.madogre.com/PowerHouse/50caliber.wmv
Here is a clip of a .50 richochet I think the shooter is pretty lucky. Any one have any more info as to.
1. what type of round did he fire.
2. what was the exact target (hardened or soft steel)
3. exact range to target
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.