Search results for query: *

  1. S

    AP Ammo

    More AP... Kermit911, Very good info from Rick! However, the magnet test for Mil-Surp. ammo, as well as a number of brands of commercial ammo is useless. This is due to the fact that the make up of the "gilding metal" covering the lead core is steel that has very thin electroplating of...
  2. S

    Which manuals still have 7.7 Jap and 6.5 Jap loads?

    Arisaka... Hope this helps... 6.5 Arisaka 7.7x58mm Arisaka Stevens Pages...
  3. S

    Labels

    Spray glue... Why not make whatever label you want on whatever scrap of paper you have and use 3M Spray Mount Adhesive One can lasts almost forever and the label can be removed without damaging whatever you've had it stuck to. It's quick, easy and except for the $10 start up cost it's...
  4. S

    Reloading 9mm Steyr

    9mm Steyr Jim is quite correct, load with 9mm Luger data. 9mm Steyr used a 115g FMJ bullet with a maximum velocity of 1050 to 1150 fps. Use the slower pistol powders like IMR-PB, AA#5, Unique, WSL or Power Pistol with the very slowest being AA#9, H-110 or W-296. Do not use 38-comp...
  5. S

    Anyone use a Lyman T-Mag?

    The T-Mag or the Redding T-7... I've used the T-Mag II for more than 4 years now, I like it, have had no troubles with it and it produces great shooting ammo. However if I was in the market for a new turret press I'd sure have to look very closely at the Redding T-7. The Redding has a...
  6. S

    6.5 x55 reciepes?

    I've been using the Hornady as well as the Sierra 160 grain bullets with great success! I recommend you use either H-1000 From 36.6 grains to 48.0 grains or IMR-7828 From 35.9 grains to 45.0 grains. And for the lawyers among us... As always, it is recommended you use the above information...
  7. S

    What is your most reliable, accurate data manual? (with poll)

    Like what David Wile said and Steven's Pages You can never have to much load data!
  8. S

    Handloading Library Suggestions Thread

    Steven's Reloading Pages
  9. S

    Steyr S40 WOW

    philr, & Zundfolge, I must disagree. You are not manufacturing a "new" "large capacity ammunition feeding device" you have only taken a existing "otherwise lawfully possessed large capacity ammunition feeding device " and modified it to work in another firearm. If this sort modification...
  10. S

    Steyr M9 beating up your brass?

    Flashpoint, Thanks. Thought it may have been that, but the "ing" through me off. I also saw a fair high number of failure to eject/extract about the time I was putting round 500 through the pistol. I installed a "very heavy" extractor spring and that put a quick end to that problem...
  11. S

    Steyr M9 beating up your brass?

    Flashpoint, FTEing? Sorry my slow brain can't seem to sort this one out.
  12. S

    Anyone ever seen...

    Well that would have been my first thoughts as well. However the bullet used is a soft point with a sealed base. Sierra 6.5mm 160g Pro-Hunter #1750 I dont know that it's a problem, it's just rather odd!
  13. S

    Anyone ever seen...

    Anyone ever seen this effect? I've only ever seen it with my Swedish Mausers. The group was shot from 100 yards with my hand loads, a Sierra (6.5mm) 160 gr. SMP and IMR 7828. I've also seen this same effect with Remington 140-grain PSPCL bullets. If you look closely at the jpeg, the shot...
  14. S

    Steyr M9 beating up your brass?

    Gentlemen, Many thanks for your thoughts. 22X9, I'll be interested to hear about what you find upon your next trip to the range.
  15. S

    Steyr S40 WOW

    Pre-ban vs Post ban magazines... Gentlemen, Perhaps I’ve missed something in this thread, however, the jest of what is being proposed here is to modify a “pre-ban†S&W standard capacity magazine to work in a “post ban†Steyr M9 handgun for which nothing but small capacity magazines...
  16. S

    Need help for my H & K model 4

    #4 buffer... TABING, I recommend you contact this guy... bastelsexy1 I've purchased items for my P9S in the past and found him to be a good guy and an excellent source for H&K parts. The only down side is that he's in Germany so every transaction takes 3 to 6 weeks and international...
  17. S

    Steyr M9 beating up your brass?

    My M9 is beating up my brass and it seems to be due to the "loaded chamber indicator" being pulled across the brass upon being ejected. Is this typical with this pistol? Also, what are the thoughts about the filling in of the primer pockets? The ammunition is new S&B 115 grain. These rounds...
  18. S

    chronograph ?

    I like my Chrony Beta Master, and now that I picked the Chrony Printer to go with it, it's everything I want/need in a chronograph. It's a nice system, although, I think somewhat cumbersome to use. That is to say, that there are only 3 buttons to access all of the many control functions...
  19. S

    9x19 , HS-7, Speer #12 load data to HOT?

    HS-7 From 5.6 grains to 8.9 grains 9x19mm Luger loads @ Stevens Pages. Com
  20. S

    Bullets, where to buy large quantities?

    You may also want to talk to Roze/Zero about Zero Bullets. Also give Berry's a try.
Back
Top