Search results for query: *

I have a .357 mag I bought used with no history. It has an 8" barrel. It is a Monsan 150xxx S/N so Im calling it a 15-2 from some earlier research. I bought a 4" barrel assembly (not a porkchop shroud neither is my 8"). When I set my gap at .006" then slip on the shroud the barrel does not...

Im in as low a profile lifestyle possible my profile will only be lower when Im dead and I carry my 1911 10+1 either in a shoulder holster or on my hip when I go to town. I shoot it a lot and if I had a shorter barreled .44mag it would be the one, I shoot it a lot to. Would I take it to a...

Well be sure of one thing, the number of rounds you put down range in practice will determine how you advance in standing. Practice is the key to improvement. I'd put the extra bucks in my practice ammo box and measure the rim thickness and sort for match ammo.

I always had a poo poo attitude about plastics and lam's until I fitted a .220Rocket M77 into a laminate and the gun never moved. dont care too much for the looks of the laminate stock but for overall performance it really is my choice for predictability.

i had a little trouble locating the gun at the arrival point. It was not on the carrasol but was being held by a security person (long before TSA) at his podium all other passangers had left the area and I was still standing there. I saw this guy sitting at his podium watching me and I walked...

I use a 2 gallon rectangular kitty litter box. I cut a 3/8 steel plate for the bottom of the bucket and tipped it about 30 degrees. before I put the plate in the bucket I I put 2 inches of rubber mulch (lowes garden dept) then the plate then I packed it full of rubber mulch and top it off with...

Pretty cool rig I have a RRA upper on a another lower with the NM trigger 1:8 twist and with 55gr thru 69gr over some Varget and you;ve got it goin on. Easy 300 yds I have an old Redfield 7X. You'll love that RRA I havent tried any 77gr usually 1:7 twist when you get that long. Go shoot that...

http://www.switchbarrel.com/Spring.htm Great link here that has pic's and excellent tips. One thing not mentioned is the decocking step shared with us by "Docsleepy". I haven't taken the plunge yet as I was trying to determine if I should decock it. Thanks Docsleepy.

I have a new model 12 BVSS with an Accutrigger. To remove the the firing pin assembly and spring in my Ruger 77 was simple, push the lug, insert a pin to hold it back and unscrew and remove the assembly. I want to do the same thing on my Savage bolt. It has a 1/4" hex in the back of the bolt...

Slow Rust Bluing it is a very labor intensive. I use a mixture of muratic, hydrochloric, and water with an oz of iron wire disolved. Usually about 3 hrs in a sweat box (85% humidity and 90F) for 3 hours. Requires 3 - 5 acid wipes. card with stainless wire brush (very soft) I'll try to post some...

I saw this Leupold 6-18x40 VX-II Waterproof & Fogproof Riflescope (2.8-1.3 Degree Angle of View) with Fine Duplex Reticle and An Adjustable Objective - Matte Black * Price: $ 419.95 and the same one again for 399.99. Whats the difference between the VX-II and the MK2? Let me ask you this I...

I'm going to be looking very closely at the Bushnell. Never had one before. I've used my 10x Redfield for many years and broke the adjusting knob off by accident and hoping to get it repaired. I was always very pleased with it. I know there are much better scopes available but the prices have...

I'll check my bags and see if I can improve the set-up. I was prone and the front and rear seemed secure but I'll relook at it when I get it set-up. Cheek weld is a problem I think a pad might be in order. Parallax in the back of my mind with the new scope may be playing into it to. I...

I think I can rule out barrel / stock as the barrel is free of contact with the stock at least before firing. The action is glass bedded and I can slide a business card between the barrel and stock all the way back to the receiver and its free. I going to shoot it again tomorrow if its calm...

What generally causes a group that is acceptable elevation wise (.400" @ 100 yds) mesure 1.300" windage. (5 shot group) The scope has been checked for tight mounts and rings. Both have been loctited. The scope is a new Bushnell 6x-18x-40mm. Mounted low but not touching the barrel (.010)...

This is a 2 part inquiry. Involved is a Ruger Mod 77 Mk II I am having difficulty determining if I have move the shoulder back of a .220 Rocket cartridge case. Initially I fire form a .220 Swift and neck size for 4 - 5 loadings and then have run the fired case through a F/L sizing die. It feels...

I can fix you up Mr Doug, I thought sure I had the SR targets saved in PDF format but dang if I can find them. On page 14 of the NRA Rulebook you find all the dimensions if you want to draw your own. In the mean time Ill find the site for the downloads. Tom try this its got what your looking...