Search results for query: *

OK been YEARS and not one PM to buy their P22. CASE CLOSED.

:banghead: Ok Colt and 1911 fans. Been a while, but I have a problem with my Colt Mustang Plus II .380. When fired, and the trigger is pulled fully to the rear (fire position), the hammer will not remain cocked after the fired round is ejected and the new round chambered. I then have to...

I will buy your P22's! I will be happy to take those P22's off your hands! Just let me know! Since they all have problems, you should sell them at a discounted price.:evil: I have had mine for 3 yrs, and only 2 FTF's (duds) in 3000+ rounds, shoots any ammo, Relatively accurately (2 inch...

Snuffy, very nice response! I will retry the brass, and recheck my loads. Thanks for all the excellent WORDS of WISDOM! That would be for all responders! Also, I got the loads out of an older lee reloading manual. Does the load data change depending on the year for these manuals/ powders...

In answer to Potatoe Judge: They feel great and sound correct when they fire, No I only own 1 45 long colt at this time, I will give the Lee hand primer a try to see. I have been using a lee turret press, with the single primer feed unit. (load each primer and prime on the down stroke after...

Maybe I should try opening up the flash holes in the cases, any idea what size hole?

still lost:: I am using Winchester large magnum/ large pistol primers. I have even tried federal 150 primers. Both in a case w/out any bullet/powder, and they still unseat. This causes the action to get really tight and not want to rotate. :fire:

Thanks for the interest and advise. I am using 7.9 grains of Unique, and 250 grn Laser cast lead, or Hornady XTP's. I have a mixed bag of 45 long colt brass, some new winchester, and magntech. (i reload 100 or so at a time). I am using a Lee Autodisk pro powder measure, and either it is a...

I have new magtech brass, and with factory remington loads I have no problems at all. Maybe this is a simple issue of old cases. Let me clarify: The primers pop out on other rounds in the cylinder, not only the one being fired.

5.2 grains of Trail boss, or Unique. I even tried loading up primers in cases and firing them with no powder/bullets. They still pop out??

:fire: I am having issues with reloading 45 long colt. Seems when I fire them in my Taurus Gaucho, the primers back out and lock up the action, and cause misfires/ no fires due to the primers not being seated. When I load, I use Winchester large pistol primers, and they seem tight *as tight as...