Search results for query: *

  1. R

    .22 for a Newbie (teen) Shooter?

    Ringer, Try going to Brown Bear sporting goods on Gratiot at about 21 mile rd. on the west side. Or Gander Mountain on Hall rd. They both have a good selection of 22 revo's Nick
  2. R

    Knifemaking

    Valkman, thanks for the tip. Nick
  3. R

    Knifemaking

    Looking very nice Valkman. I have a question for you or someone who knows. How do you pin/attach the handles on? I ask because I have always used screws and was currious about trying pins. Thanks Nick
  4. R

    Opinoins wanted on some knives I have made

    Thanks, P95, Pyriel is my brother. He, unlike myself is pretty good at computers and technical things. SO I asked him to post some better pics of the knives I made for him. ;) Nick
  5. R

    Opinoins wanted on some knives I have made

    c yeager, you are correct they are stock removal blades. I start out by cutting out the blank on a birdgeport tracermill. Then I use a 4 1/2 inch angle grinder with a sanding pad and rough in the angle then I move to a 8 inch bench grinder to hollow grind the blade. I finish with a 90 degree air...
  6. R

    Opinoins wanted on some knives I have made

    I have not yet made any folding knives.... sorry. I am pretty happy with what one can buy off of the shelf with a folder. Besides we sell folding knives where I work so I get to basically take what I want. The o-1 material when heat treated does a fantastic job of holding a edge. My blades are...
  7. R

    Opinoins wanted on some knives I have made

    Hey Daniel I see you are in Indiana. My brother whom I made the knivs for livs about 20 minutes from the school. Nick
  8. R

    Opinoins wanted on some knives I have made

    As daniel has pointed out Tom Brown. The larger knife and the smaller knife are his design in which I have tried to follow. The ones with the exotic grips are my design. The portion of the blade in which is thined out on the large knife is designed to be used as a draw knife. My brother talked...
  9. R

    Opinoins wanted on some knives I have made

    The big knife is 1/4 inch 0/1 and the smaller ones are 3/16 inch o/1. All are heat treated and drawn to 59-60 hrc. Thanks for looking Nick
  10. R

    Opinoins wanted on some knives I have made

    Lets try that again
  11. R

    Opinoins wanted on some knives I have made

    Let me know what you guys think, good bad or ugly. Nick
  12. R

    Problems reusing Glock-fired brass

    Glad to hear you have solved the issue. Nick
  13. R

    Which size tap to use?

    Use the m3x.5 tap it requires a .0945 or 2.4mm hole. You should be able to run it right in. If you need assistance call me at Metrics Unlimited 1-800-638-7986. Just ask for Nick, we sell metric fastners and cutting tools. We are in the Detroit MI. area. Good Luck Nick
  14. R

    3" .357 peppers my shooting room with unburnt powder...

    DHart, You might want to try Hodgdon Longshot, It gives the performance of Power pistol without the flash. I use it exclusively in my .357 SP 101 with great results. I cant recall my speed across the chrony but I do know it was pretty impressive. I use 158 gr remington hollow points with...
  15. R

    1911 barrel question

    Thanks for the reply. So I am right, I can't wait to end this argument. Nick
  16. R

    1911 barrel question

    I have been arguing with a friend of mine about Clark cut ramped barrels vs. nowlin cut ramped barrels. Let me start by saying he has Para Ord. .40 double stack ( not sure which one) but it has the clark cut in the frame. He wants to make it a 10mm with a new barrel and says he is going to use a...
  17. R

    Problems reusing Glock-fired brass

    Well, My take on this is, with the radiused mouth of the dillon size die and the swollen brass you will not be able to reduce the base dimension very consistantly, as you already know. One solution would be to switch dies but with the S.D.B. it requires you to use its specific dies...so thats...
  18. R

    First powder for new reloader?

    My opinoin would be for you try Hodgdon Longshot, it metres pretty well and gives good performance without the flash of say... Power Pistol. But for max 44 mag loads you really need H-110. Nick
  19. R

    Hardcast Bullet Question

    T&T is a great company to do buisness with. My only suggestion to you would be if you want your order processed faster place your order over the phone with Ray as opposed to ordering on line. The on line orders seem to add a couple of extra days to the delivery time. Give there star bullets a...
Back
Top