ar15

I was wondering just when a previous soviet-era country would adopt the platform as it makes a lot of sense. One of the key advantages of the Ukrainian military going this route as mentioned in the article below is the fact they can utilize their large stockpiles of 7.62x39 ammo and as they...

Hello, new to the forum, and not new to guns. I'm having a problem with the AR15 I recently built (my first). I have been having short stroking problems since the start; 20% of my spent casings are ejecting, and it never strips next round from mag. Last weekend, I had a friend help me diagnose...

With recent events, Dick’s (and many other sporting-goods companies) are no longer selling “assault” rifles. First off, it bothers me that all of these people (mostly libs) are referring to AR15s as “assault rifles” or “assault weapons”. An assault weapon is defined as a rifle with select-fire...

I went to a local store today and seen a steel 30 round AR15 mag that said it was a Colt. Did Colt make a 30 round steel magazine? If so were they reliable? If they were Im going back to get them. Thank

https://www.cnbc.com/2018/02/20/trump-signs-a-memo-telling-attorney-general-sessions-to-ban-devices-that-turn-weapons-into-machine-guns.html President Donald Trump announced Tuesday that he has recommended that "bump stocks," or devices used to make semi-automatic weapons capable of firing...

The test performed by InRangeTV is that they take the rifles and pour soupy mud on the closed actions of an AK and AR and proceed to shake the mud off and attempt to fire a magazine of ammunition. After which they pour mud on an open action (open safety lever on AK and open dust cover on AR)...

Long time lurker, first time poster, I can usually find all the info I need in other threads. I started reloading .223 with H335 and was able to develop a load that is consistently capable of 1.5 MOA 5 shot groups at 100 yards. I have been trying to develop loads for Benchmark and ARComp as I am...

I had 2 of these in the past and sold them. It took me forever to find these again. I just found them at the Knob Creek machine gun shoot yesterday. They weren't in a package and the guy didnt know who made them. Anybody?

I found one called the VooDoo Jet compensator and it looks like it works in the video. Its around $80 and I'm cheap. lol Are there compensators out there cheaper that work as good as that one? I'm upgrading my AR slowly and right now I'm looking to lighten the recoil.

I recently installed a new Odin Works 6.5 Grendel barrel in an AR15 upper receiver. After break in using Hornady 123 gr AMAX factory ammo and thoroughly cleaning everything I set about measuring up for some hand loading. With a Hornady OAL gauge and 120 AMAX bullets, I measured 2.237" OAL with...

I built my first AR 15 and it works great! I didn't like its color scheme so I painted it flat black with Rustoleum heat resistant paint. Baked it in my oven for 3 hours at 350 degrees. I did sand it, cleaned it and primed it before painting. Now the paint isn't flaking off except when ever i...

Hey guys, Just wanted to share a quick video I made showing the failure of my NFA polymer lower and a quick discussion about it. Curious to hear others opinions on the subject. Cheers

Anyone who might be interested... Open Range Day Saturday, April 1, 2017 SCOTG (SC Official Training Grounds) Time runs from 10am until 4pm and club staff will be on hand to assist. Bring your own targets and ear protection, or purchase them on site. This private range is located @ 8524 Neely...

A couple weeks ago, I decided to start planning for my next AR build, which I decided would be an 18" DMR type rifle. While researching that build, I stumbled across some info on 300 Blackout, and started daydreaming about having an SBR. Long story short, I started thinking a 9" 300 Blackout...

I've been buying "premium" or at least premium priced bullets from Hornady, Sierra, and Nosler exclusively but it has dawned on me recently that I might be throwing cash away and if the goal is to shoot so I can improve my skills, I might be able to shoot more if I lower the cost of the rounds...

I'd been wanting an AR for a while but kept putting it off. Figured I'd wait until next summer when I graduate. I wanted a complete BCM build. Well, with the pending election and being blessed with work this summer, I decided I'd at least buy a stripped lower and pick up the parts over time, no...

I just received my new 18" 223 Wylde 1:8 Twist Fluted Barrel. Other than cleaning, what other things do you do to a new barrel and why? Thanks!

Hey folks, this is my first post. Happy to be here. Been thinking about making a profile here for awhile. Glad I finally did. I'm new to reloading. Just picked up a used single-stage setup and I'm gathering info for loading. I've been searching around trying to cross reference, 2 hours later...

Hello I just joined and wanted to say.. "Rifle Country" is my place! I am 19 from California, and I just bought my first rifle! DPMS "Oracle" .223/5.56 with a sight mark ultra shot pro spec (14002 Model) out the door whole set up only cost me $750. I took it to the range, having never shot an...

Let's say I have a AR Pistol that was purchased whole as a pistol not some Franken-gun. Standard pistol buffer tube, no stock. Lower marked multi-caliber. Barrel is 8". What happens when I mate the pistol lower it to a 16.5" upper??? Is it still a pistol? Is it legal?