handloads

Looking at what bullets would be very effective against soft bodies so I can have at least one mag of it. I'm looking at Maker bullets 300gr TREX, Lehigh 300gr Controlled Fracturing, or Cutting Edge 260gr Maximus copper solid. Kind of limited on powder and only have H110 and Lil Gun, so bullets...

I have been reloading for a little while now, but have been buying my cast bullets online until very recently when I came across a large source of free lead and would like to try my hand at powder coating the bullets I cast. I was wanting some advice on what brand to purchase. Essentially, I...

I'm working on my first 38 special handloads and have some questions that I'm hoping someone can shed some light on. I've been reloading for about 5 years now and i finally got a chronograph last week to start recording velocities of my handloads and I noticed something unusual when metering...

Has anyone loaded with Privi's .268 123gr or 139 gr? I'm hitting a brick wall looking for load data. All I'm seeing is data for the Hornady stuff. To be fair, that's what I used to load too, but I'm out, and wasn't getting the best out of them anyway. Thanks in advance, Rick

I have a really odd issue that I have found. I have a Remington 700 VTR in a .308. I have had accuracy troubles in any load, hand or factory, that is not using CFE .223 is there any reason for this? Can a rifle prefer a specific powder? Or is this all coincidence? All opinions welcome, thanks...

I recently ordered a 3 die carbide set from RCBS for .38 special and .357 magnum from amazon. I got the set in the mail today and was surprised to see that both the sizing and seating dies were labeled 380 AUTO. Upon further inspection I discovered that amazon (or someone, but I assume amazon)...