reduced load

  1. N555

    The perfect 30-30 load for new shooters

    I loaded thsee about 20 years ago. Knew they were normal accuracy for a 30-30 lever gun. I burned up about a hundred 30-30s loaded with 120gr bullets over 7gr of unique. They were shooting about 1 inch at 25 yards. When I have been able to find load data for unique and a small bullet like that...
  2. J

    Reduced 223 using H4895 (AR2206H) 55g

    I will be creating a ladder load to test accuracy at 50m for reduced H4895 (AR2206H) loads with a 55g Nosler Varm HP. Brass: ADI Primer: Fiocchi SR Projectile: Nosler Varm 55g HP Powder: H4895 (AR2206H) Load Max: 26g Loads will be from 60% in 5% increments, 4 shot groups to 95%. Barrel will be...
  3. Alex G

    Advice Needed-Cast Bullets in 30-06 And Reduced Loads

    Hello all, I need some advice regarding the use of Eggleston Munitions coated lead projectiles in 30-06. (Pictures at end) All full-power 06 loads in the Hodgdon manual start around 2700 FPS or so, but Eggleston specifically says not to exceed 2400 FPS with these projectiles. The intent of...
  4. Snidely70431

    Shooting reduced loads out of inline muzzleloaders

    I am a target shooter. I do not hunt. I like muzzleloaders for the ritual of capping, loading the powder, seating the projectile, taking a shooting position, sighting, and firing. If I fire a dozen rounds in an hour it is a lot. I have several muzzleloaders, but the two I prefer are my CVA...
  5. Tinybob

    Anybody got a Lyman manual handy?

    I'm looking for a starting point for 308 win, with 115gr handcast lead round nose. No gas check. Looking for something in the 1500 to 1600 fps range. I have IMR 4227, H110, and Varget.
Back
Top