Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

10/22 Barrel

Discussion in 'NFA Firearms and Accessories' started by 41magsnub, May 29, 2010.

Thread Status:
Not open for further replies.
  1. 41magsnub

    41magsnub Member

    Joined:
    Jul 10, 2007
    Messages:
    1,791
    Location:
    Missoula Montana
    Is there a aftermarket barrel for a 10/22 out there that is not in the SBR range, but is threaded AND has a dovetail for a sight at the front?

    What I keep thinking would be really slick would be a 10/22 carbine with tech sights but with a threaded barrel for a suppressor.

    A guy could always get a bull barrel and have it threaded and a dovetail cut into it but I keep thinking there has to be something like this already out there.
     
  2. WoofersInc

    WoofersInc Member

    Joined:
    Mar 30, 2007
    Messages:
    1,111
    Location:
    Las Vegas
    Check with Tactical Solutions. They make several threaded barrels for the 10/22. They may have one.

    http://www.tacticalsol.com/products

    I didn't see one on the website, but I would call them. They frequently have runs of stuff that isn't posted on the site.
     
  3. lions

    lions Member

    Joined:
    Apr 30, 2008
    Messages:
    1,204
    Location:
    Kansas
    Tech-sights does sell a .920 target barrel dovetail adapter that slips over the muzzle and secures with thread locking compound. It looks like you could slide it on a threaded .920 barrel and leave the threads exposed.

    http://www.tech-sights.com/
    Click on "Ruger 10/22 sights" located on the left side of the page, then scroll down about halfway.
     
  4. 41magsnub

    41magsnub Member

    Joined:
    Jul 10, 2007
    Messages:
    1,791
    Location:
    Missoula Montana
    Would the tech sight deal actually fit over the threads and not eat up too much length?

    Also, ideally I'd like to stay with a sporter style barrel.
     
  5. lions

    lions Member

    Joined:
    Apr 30, 2008
    Messages:
    1,204
    Location:
    Kansas
    I have no idea, I just happened to see it on their site. You might try posting this in rifle country to get more traffic since this isn't specific to an NFA item.
     
  6. 41magsnub

    41magsnub Member

    Joined:
    Jul 10, 2007
    Messages:
    1,791
    Location:
    Missoula Montana
    jpgrips.com can do it. I'm all set up and the barrel will get mailed on Tuesday.

    Thanks for all the options!
     
  7. PTK

    PTK Member

    Joined:
    Mar 25, 2007
    Messages:
    3,712
    Location:
    Montana
    FWIW, I can take care of that for you. ;)
     
  8. 41magsnub

    41magsnub Member

    Joined:
    Jul 10, 2007
    Messages:
    1,791
    Location:
    Missoula Montana
    You seemed busy :)
     
  9. PTK

    PTK Member

    Joined:
    Mar 25, 2007
    Messages:
    3,712
    Location:
    Montana
    This weekend, yes. After tomorrow afternoon, back to my non-busy self unfortunately.
     
Thread Status:
Not open for further replies.

Share This Page