10mm data

[Coldfinger]

I'm typically not this guy. My Lymann 49th isn't currently available. Gonna load some 10mm and I don't have any historical data for this round as the XDM 10 is a new acquisition. I found a recipe online and I currently only have #5 and Blue Dot on hand. I figured I would give the Blue Dot a try as it was really fun in 357Sig and works well in 40. I understand BD prefers loads at higher pressures. Will be using once fired Federal cases.
Data from powderthrough.com
Anyone have thoughts about that resource?
Here's what I've come up with. 10mm isn't brand new to me its just been 7 or more years since I had one.

10.5 grain Blue Dot
155 grain xtreeme RNFP
Remington large pistol primer
COAL 1.250

Looks to be mid level and within safe. Thank you for your input.

Goose

 

[marchboom]

From the Lyman manual, 49th edition:
155 gr JACKETED Silvertip bullet: Blue Dot starting, 9.7 gr, Max load, 10.8 gr. COAL - 1.250". CCI 300 primers.
150 gr JACKETED HP bullet: AA#5 starting 7.0 gr., Max load, 9.0 gr. Same COAL and primers.

 

[LiveLife]

10mm ... 155 grain xtreeme RNFP ... 1.250 ... only have #5 and Blue Dot

10.5 grain Blue Dot ... Looks to be mid level and within safe

Here's Accurate load data for Rainier FP plated bullet which should be similar to X-Treme plated bullet - https://www.ramshot.com/wp-content/uploads/2020/08/WesternPowdersHandloadingGuide8.0_WEB.pdf

• 10mm 155 gr Rainier FP No 5 OAL 1.260" Start 8.9 gr (1151 fps) - Max 9.9 g (1309 fps)

Here's Speer load data for TMJ FN which is thick plated bullet (And Blue Dot load matches load data from Alliant) - https://reloading-data.speer-ammo.c...gun/40_caliber-10mm_400_dia/10mm_Auto_155.pdf

• 10mm 155 gr Speer TMJ FN Blue Dot OAL 1.250" Start 11.0 gr (1164 fps) - Max 12.0 gr (1291 fps)

• 10mm 155 gr Speer TMJ FN No 5 OAL 1.250" Start 9.2 gr (1004 fps) - Max 10.2 gr (1176 fps)

 

[Lennyjoe]

See below. Hornady 10th edition.

 

[Coldfinger]

Thank you gents. Looks like I'm good. I went with
BD 10.3gn 1.250 COAL.
Appreciate ya's
Goose