Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

1860 Colt Army Parts

Discussion in 'Blackpowder' started by Norton Commando, Mar 20, 2011.

Thread Status:
Not open for further replies.
  1. Norton Commando

    Norton Commando Member

    Joined:
    Mar 4, 2011
    Messages:
    279
    Location:
    Houston, Texas
    I have an original 1860 Colt Army that has a broken hammer screw and a broken hand and spring assembly. Does anyone know where to find parts for this gun? Do the replica gun manufacturers sell parts that will interchange with the those from the original firearms?

    Thanks and regards,

    Jason
     
  2. junkman_01

    junkman_01 member

    Joined:
    Aug 7, 2009
    Messages:
    1,728
    Location:
    Florida
    The hammer from a Uberti will probably work, but the reproduction guns are Italian and use metric screws. Try VTI gun parts for the hammer.

    Sorry, I mis-read your post. Try Dixie Gunworks for the original hammer 'screw', and the hand and spring.
     
    Last edited: Mar 20, 2011
  3. Old Fuff

    Old Fuff Member

    Joined:
    Dec 24, 2002
    Messages:
    23,908
    Location:
    Arizona
    Dixie Gun Works in Union City, TN. (www.dixiegunworks.com) has had aftermarket parts for original Colt's since the 1950's.

    While you're at it, be sure to buy a copy of their over-700 page print catalog. Lots of good information, and it only costs $5.00. It too hasn't gone up since the '50s.

    Note: They also have parts for the popular Italian reproductions, so be sure to look in the right section for "original Colt's parts."
     
  4. Norton Commando

    Norton Commando Member

    Joined:
    Mar 4, 2011
    Messages:
    279
    Location:
    Houston, Texas
    Thank you there Old Fuff and junkman,

    I searched the Dixie Gunworks website for a hand and spring assembly and it returned a goose egg. Perhaps I'm not calling this part by its correct name. The part I'm trying to find is a pawl-looking gizmo with an integral small leaf spring. This is the part that engages the cylinder and rotates it when pulling the hammer back. Is "hand and spring assembly" the correct name for this part?

    Thanks again,

    Jason
     
  5. junkman_01

    junkman_01 member

    Joined:
    Aug 7, 2009
    Messages:
    1,728
    Location:
    Florida
    Norton,
    I just looked on the Dixie site and these parts (although reproductions) are made for the original Colt 1860 Army....
    TP1605 Hand with spring...$6.50
    SP1513 Hammer screw...$3.50
     
  6. Norton Commando

    Norton Commando Member

    Joined:
    Mar 4, 2011
    Messages:
    279
    Location:
    Houston, Texas
    Thanks again junkman,

    Just another question please: what's the difference between a Colt 1860 and a Colt 1860 Army? The reason I ask is because Dixie lists two different part numbers for the parts I need - one p/n for the Colt 1860 and a different one for the Colt 1860 Army.

    Best
     
  7. junkman_01

    junkman_01 member

    Joined:
    Aug 7, 2009
    Messages:
    1,728
    Location:
    Florida
    There is no difference. Please list the part numbers as I am not seeing different part numbers other than the ones I gave you.
     
  8. Norton Commando

    Norton Commando Member

    Joined:
    Mar 4, 2011
    Messages:
    279
    Location:
    Houston, Texas
    Ok, here goes:

    Colt 1860 parts:
    Screw: SP1513
    Hand and spring: TP1605

    Colt 1860 Army parts:
    Screw: SP1858
    Hand and spring: MP 1813

    Strange...
     
  9. LightningMan

    LightningMan Member

    Joined:
    Apr 1, 2008
    Messages:
    1,029
    Could be the 1860 Colt Navy? maybe.
     
  10. junkman_01

    junkman_01 member

    Joined:
    Aug 7, 2009
    Messages:
    1,728
    Location:
    Florida
    Norton,

    This is easily explained, so stay with me....

    The part #'s I gave you are reproduction part for an original Colt 1860.
    The part #'s you listed are new parts for Italian reproduction 1860 Army pistols.

    You have an original 1860 Colt, so you need the parts I listed for you. Farla capisce?
     
  11. Norton Commando

    Norton Commando Member

    Joined:
    Mar 4, 2011
    Messages:
    279
    Location:
    Houston, Texas
    Ok, thanks, I got it now.

    The description of both parts used the word "reproduction", so in my haste I thought it meant reproduction parts for both guns. But after reading more closely, I see that there's a key difference. One description refers to a reproduction part and the other description refers to a reproduction gun. Big difference, my mistake, thanks for the clarification!

    Jason
     
  12. StrawHat

    StrawHat Member

    Joined:
    Jan 28, 2007
    Messages:
    3,623
    Location:
    NE Ohio
    No such revolver.
     
Thread Status:
Not open for further replies.

Share This Page