Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

1861 Springfield

Discussion in 'Blackpowder' started by Shilohdreamer, Mar 9, 2012.

Thread Status:
Not open for further replies.
  1. Shilohdreamer

    Shilohdreamer Member

    Joined:
    Nov 28, 2011
    Messages:
    18
    :what:Hello everyone. I have had this gun in the bottom of my closet for over ten years. I bought it in Hernando, Mississippi. The man said it was used in the calvary which is why it appears to be shorter in length. I know my history but nothing about these guns. I should have dusted the half inch dust off before I took the photographs. The firing mechanism works and the ramrod is the right length. Is this thang worth anything? Thanks
     

    Attached Files:

  2. StrawHat

    StrawHat Member

    Joined:
    Jan 28, 2007
    Messages:
    3,623
    Location:
    NE Ohio
    It may have been used by horse soldiers or it may have been "sporterized" at some point when they were declared surplus and sold off to places Like Bannermans to be refurbished and sold again to folks who needed a rifle. The stock is an odd length so it may have been broken at just rounded over.

    What is the barrel length?
     
  3. junkman_01

    junkman_01 member

    Joined:
    Aug 7, 2009
    Messages:
    1,728
    Location:
    Florida
    It's been 'butchered'. AFAIK, there were no 1861 Springfield carbines ever officially made!
     
  4. towboat_er

    towboat_er Member

    Joined:
    Jan 5, 2011
    Messages:
    889
    Butchered yes. But it does still have value. Just not much as a collectable.
     
  5. AlexanderA

    AlexanderA Member

    Joined:
    Feb 27, 2011
    Messages:
    2,869
    Location:
    Virginia
    The hammer has been replaced. That's a wrong-shaped hammer for an 1861. Also, the ramrod is too short to load this thing.
     
  6. wojownik

    wojownik Member

    Joined:
    May 15, 2009
    Messages:
    1,842
    Also, also, there is no cleanout screw, which means the barrel is from an 1863 Springfield (or possible an 1861 contract Colt, but that would be a bit rare), with an 1861 lockplate, and incorrect ramrod. From the angle, can't see what has been done for a front sight on the shortened barrel, or the rear sight.

    A sporterized mixmaster, but done long, long ago... Might have some collectible interest to someone, but it's not going to bring any sort of premium.

    Here's a link to an auction from last year for an 1861 Bridesburg in similar configuration. They wanted $275 for it, FWIW
     
  7. Shilohdreamer

    Shilohdreamer Member

    Joined:
    Nov 28, 2011
    Messages:
    18
    1861

    Yep, I was thinking maybe $300. Not sure what you mean by carbine though. Thanks to all for the input. I knows my history but nots my gunnery. Come on Springtime! Terry in Tennessee
     
  8. Shilohdreamer

    Shilohdreamer Member

    Joined:
    Nov 28, 2011
    Messages:
    18
    More info on 1861

    OK, I measured the barrel and it is 33 inches long. As far as the front sight it has one of those raised dots (wrong word I know). The barrel has been repaired at some point but I can't see where this thing was shortened from the traditional barrel length. I don't want to just wall hang it b/c I know the thing will fall off the wall and break at the thin area of the wood. Anybody want to make me an offer? Or how should or where should I sell this. I was in need of $200 (not what I want but need). If anyone is concerned about it being too butchered. Just pay me the shipping cost to send to you. I am thinking what $25? Then you can pay the $200 if you feel ok with it. I also found a powder flask. It looks like the Dixon kind but the name plate is missing off the top. I will throw that in. Separate shipping of course. Let me know any advice.
     

    Attached Files:

  9. Shilohdreamer

    Shilohdreamer Member

    Joined:
    Nov 28, 2011
    Messages:
    18
    1861 info

    There are also the initials VP on the top of the barrel near the loaded end of the barrel that is. ;)
     
  10. 4v50 Gary

    4v50 Gary Moderator Staff Member

    Joined:
    Dec 19, 2002
    Messages:
    18,528
    Sporterized.
     
  11. wojownik

    wojownik Member

    Joined:
    May 15, 2009
    Messages:
    1,842
    The initials VP are a standard proof mark. Absolutely nothing unusual there.

    Since this is such a mix-master, might go for less than that auction I linked above (p.s. - note that the action got no bids).

    Sorry not better news...

    If you want to sell it, you should probably post in the For Sale forums
     
  12. Shilohdreamer

    Shilohdreamer Member

    Joined:
    Nov 28, 2011
    Messages:
    18
    1861 mixmaster

    Thank you Wojo. I will follow your suggestion. Thanks for everyone with the education. I hope everyone has a great shooting Spring. Terry
     
  13. hawkeye74

    hawkeye74 Member

    Joined:
    May 24, 2010
    Messages:
    120
    Where do you live. I am in N MS. Might make an offer if I can see it up close.
     
Thread Status:
Not open for further replies.

Share This Page