Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

.243 range report, questions

Discussion in 'Handloading and Reloading' started by BigBlack, Aug 30, 2008.

Thread Status:
Not open for further replies.
  1. BigBlack

    BigBlack Member

    Joined:
    Feb 23, 2008
    Messages:
    103
    Location:
    Lyons, GA
    Well back to the range with second set of hand loads for my 243 this time I had a Chronograph with me.

    I am using Lee’s Reloading Data Book so if you have something else please lookup my load and see if you can answer my questions.

    Gun is a Remington 700 .243 22” barrel that is fully floated and no other work.

    Load is
    Winchester Brass Full Length Sized
    CCI BR-2 Primer
    H4350 (5 each of .5gr increments from 37gr to 40gr 35 total rounds)
    Sierra 100gr Game King Set 20 thousands off lands

    Here are the results, groups are not what I was expecting but I have a question regarding the velocities

    Powder Charge, low, high, avg, sd, group
    37, 2504, 2568, 2537, 21.74, 1.227
    37.5, 2607, 2704, 2650, 35.60, 1.930
    38, 2650, 2702, 2673, 20.75, 1.234
    *38.5, 2754, 2761, 2757, 2.34, 1.207
    39, 2699, 2746, 2722, 19.90, 2.104
    39.5, 2745, 2791, 2772, 16.17, 1.825
    40, 2783, 2829, 2809, 15.14, 1.537

    *chrony only picked up first two shots. I was not checking on it.

    Now my question:
    My load book claims my starting velocity should be 2806 and my max velocity should be 2973. I am showing no signs of high pressure and would like to try some 40.5 and 41 grain loads. Do you think this would be okay?
     
  2. NVMM

    NVMM Member

    Joined:
    Mar 13, 2005
    Messages:
    435
    Location:
    NV
    My Hodgdon book is listing loads with a 24" barrel. So with a 22" barrel you might in the ballpark using that powder.
    It's also showing 40grs of H4350 as MAX.
     
  3. Poper

    Poper Member

    Joined:
    Jun 12, 2006
    Messages:
    1,085
    Location:
    Approximately N33°18' / W111°48'
    Hodgdon's 2007 annual manual shows 40.0 gn max. for 100 gn projectiles,but Hodgdon's #26 indicates 39.0 start (vel = 2664) and 43.0 (vel = 2994) max. for H4350. As always, start low and work up slowly to published maximums.
    My Hornady#7 Manual lists 40.8 gn max. for the 100 gn pills, Speer #14 lists 42.0 gn max., Nosler#6 lists 41.5 gn max. Sierra's manual (Edition V, 2nd printing) does not list H4350. It does list IMR 4360 at 41.7 gn max. and AA4350 at 40.0 max.

    You also may be able to shrink your group size by trying different seating depths. All guns seem to have their own personality and preferences. My .300WSM likes 150 gn bullets seated .035 off the lands and one of my .222 Remingtons likes to be seated within .010 of the lands. Take your best two groups with the lowest sd's and play with the COAL. You may be pleasantly surprised.

    I hope this is helpful.

    Poper
     
  4. BigBlack

    BigBlack Member

    Joined:
    Feb 23, 2008
    Messages:
    103
    Location:
    Lyons, GA
    Thanks, Poper I will call Sierra Monday and see if they can also add to the mix
     
  5. cliffy

    cliffy member

    Joined:
    Aug 11, 2008
    Messages:
    643
    Location:
    Southwestern Michigan
    .243 Winchester's Best Powders

    IMR 4350 for hyper 62 grain bullets; Hodgdon H4350 for 90 grain bullets; Alliant Reloder 22 for 100 grain bullets; 105 grain loads like IMR 7828 SSC. These stats are from my personal chronograph findings. Alliant RL-25 is too slow-burning for best .243 velocities, and best saved for larger calibers applications. I'm a velocity freak, so I don't waste time with the likes of Alliant RL-19, etc. Still velocity is not king, if not extremely accurate. If I could have only one powder for all .243 applications, it would be H4350, handsdown. Cliffy
     
Thread Status:
Not open for further replies.

Share This Page